GE GLM064 User Manual page 58

A.3.2.4 show access-list
Description Access list
show access-list [ interface [ ( <port_type> [ <v_port_type_list> ] ) ] ] [ rate-limiter [
Syntax
<rate_limiter_list> ] ] [ ace statistics [ <ace_list> ] ]
show access-list ace-status [ static ] [ link-oam ] [ loop-protect ] [ dhcp ] [ ptp ] [ upnp ] [ arp-
inspection ] [ mep ] [ ipmc ] [ ip-source-guard ] [ ip-mgmt ] [ conflicts ] [ switch <switch_list> ]
Parameter
Name
interface
ace-status
port_type
v_port_type_list
rate-limiter
rate_limiter_list
ace
statistics
ace_list
static
loop-protect
ipmc
ip-source-guard
dhcp
conflicts
arp-inspection
A.3.2.5 show aggregation
Description Aggregation
Syntax show aggregation [ mode ]
Parameter
Name
mode
A.3.2.6 show alarm
Description Alarm information
Syntax show alarm { history | current }
Parameter
Name
current
history
GFK-3030
Description
Select an interface to configure
The local ACEs status
GigabitEthernet,1 Gigabit Ethernet Port
PORT_LIST, Port list in 1/1-8
Rate limiter
<RateLimiterList : 1~16> Rate limiter ID
Access list entry
Traffic statistics
<AceId : 1~256> ACE ID
The ACEs that are configured by users manually
The ACEs that are configured by Loop Protect module
The ACEs that are configured by IPMC module
The ACEs that are configured by IP Source Guard module
The ACEs that are configured by DHCP module
The ACEs that did not get applied to the hardware due to hardware
limitations
The ACEs that are configured by ARP Inspection module
Description
Traffic distribution mode
Description
Show alarm current infomation
Show alarm history infomation
December 2017
Appendix A. Command Language Interface (CLI)
51