Sflow Configure Commands - GE GLM064 User Manual

sFlow Configure Commands

A.3.8.1 sflow
Description Enables/disables flow sampling on this port.
Syntax sflow [ <range_list> ]
Parameter
Name
< range_list >
A.3.8.2 sflow agent-ip
Description The agent IP address used as agent-address in UDP datagrams. Defaults to IPv4
loopback address.
Syntax sflow agent-ip { ipv4 <ipv4_addr> | ipv6 <ipv6_addr> }
Parameter
Name
< ipv4_addr >
< ipv6_addr>
A.3.8.3 sflow collector-address
Description Sflow runtime, see sflow_icli_functions
sflow collector-address [ receiver <range_list> ] [ <word> ]
Syntax
Parameter
Name
< range_list >
A.3.8.4 sflow max-datagram-size
Description Statistics flow Maximum datagram size.
Syntax sflow max-datagram-size [ receiver <range_list> ] <200-1468>
Parameter
Name
<range_list>
<200-1468>
A.3.8.5 sflow max-sampling-size
Description Specifies the maximum number of bytes to transmit per flow sample.
Syntax sflow max-sampling-size [ sampler <range_list> ] [ <14-200> ]
Parameter
Name
< range_list >
<200-1468>
GFK-3030
Appendix A. Command Language Interface (CLI)
Description
Sampler instance
Description
Ipv4 address
ipv6 address
Description
Sampler instance
Description
receiver list
packet byte
Description
Sampler instance
packet byte
December 2017 103