GE GLM064 User Manual page 100

A.3.4.9 switchport hybrid egress-tag
Description Egress VLAN tagging configuration
Syntax switchport hybrid egress-tag { none | all [ except-native ] }
Parameter
Name
none
all
except-native
A.3.4.10 switchport hybrid ingress-filtering
Description
Syntax
Parameter
A.3.4.11 switchport mode
Description
Syntax
Parameter
A.3.4.12 switchport trunk allowed vlan
Description Set allowed VLAN characteristics when interface is in trunk mode
Syntax switchport trunk allowed vlan { all | none | [ add | remove | except ] <vlan_list> }
Parameter
Name
all
none
add
remove
except
vlan_list
A.3.4.13 switchport vlan protocol group
Description Protocol-based VLAN group commands
Syntax switchport vlan protocol group <word16> vlan <vlan_id>
Parameter
Name
word16
vlan_id
GFK-3030
Description
No egress tagging
Tag all frames
Tag all frames except frames classified to native VLAN of the hybrid port
VLAN Ingress filter configuration
switchport hybrid ingress-filtering
Set switching mode
switchport mode { access | trunk | hybrid }
Name Description
access Set mode to ACCESS unconditionally
trunk Set mode to TRUNK unconditionally
hybrid Set mode to HYBRID unconditionall
Description
All VLANs
No VLANs
Add VLANs to the current list
Remove VLANs from the current list
All VLANs except the following
VLAN IDs of the allowed VLANs when this port is in trunk mode
Description
Group Name (Range: 1 - 16 characters)
VLAN ID required for the group to VLAN mapping (Range: 1-4095)
December 2017
Appendix A. Command Language Interface (CLI)
93