Program Mode - Toshiba G7 Quick Start Manual

Program Mode

Table 4 lists the menu items of the Program mode and maps the flow of the menu selections. The
Parameter Numbers for the listed functions are provided where applicable. The functions listed may be
accessed (and changed) as mapped below or via the Direct Access method: Program ⇒ Direct Access ⇒
Applicable Parameter Number.
Primary Menu
F
UNDAMENTAL
P
ARAMETERS
S W
TARTUP IZARD
C F
HANGED ROM
D
EFAULT
D A
IRECT CCESS
EOI O S
PTION ETUPS
30
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Table 4. Program mode mapping.
Program Menu Navigation
Sub Menu
Frequency Setting
Standard Mode Selection
Accel/Decel #1 Settings
Motor Set #1
(See section Startup Wizard Requirements
(See section Default Setting Changes
(See section Direct Access Parameter Information in the G7 ASD Operation Manual.)
Contrast (adjustment)
Local/Remote Key
Realtime Clock Setup
Preferences
Alarm Popups
Parameter Name
Maximum Frequency
Upper Limit
Lower Limit
V/f Pattern
Command Mode
Frequency Mode #1
Frequency Mode #2
Reference Priority Selection
Mode #1/#2 Switching Frequency
Accel #1
Decel #1
Accel/Decel Pattern
Automatic Accel/Decel Enable/Disable
#1 Base Frequency
#1 Max Output Voltage
#1 Torque Boost
#1 Electronic Thermal Protection Level
in the G7 ASD Operation Manual.)
in the G7 ASD Operation Manual.)
Darker (highlight Darker and press Enter)
Lighter (highlight Lighter and press Enter)
Command
Frequency
Date and time setting (requires RTC option)
Double Click Speed
Arrow Speed
Encoder Speed
Encoder Action
Overheat Alarm
Undervoltage Alarm
Parameter
Number
F011
F012
F013
F015
F003
F004
F207
F200
F208
F009
F010
F502
F000
F014
F306
F016
F600
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
G7 ASD Quick Start Guide