Remote Interface Configurations
RS232/RS422
To check the settings for the RS232 or RS422 interfaces press
below the respective softkey labels. Press
To change any setting:
1 Press
2 Select the parameter you want to change by pressing the softkey.
3 Use the
4 Press
To configure the power meter to use the serial RS232 or RS422 interfaces press
EPM-P Installation Guide
,
Remote Interface
Configure Interface
System
,
Remote Interface
and
keys to select (highlight) the digit you want to change;
use the
and
keys to increase or decrease the value. Press
confirm and save the new value. Pressing
value.
More
to access the second page of the settings menu.
System
,
Remote Interface
,
. The settings are displayed
Serial
to access the next menu page.
More
,
Configure Interface
Cancel
,
,
Select Interface
RS232
Getting Started
System
,
,
.
Serial
to
Enter
restores the previous
, or
.
RS422
29