6: Physical Installation - FIBARO FGK-10x Operating Manual

#6: Physical installation

To install the Door/Window Sensor:
1. Stick the included self-adhesive pads to the bottom of the device
and magnet.
2. Peel off the protective layer of the sticker.
3. Stick the device onto the door/window frame.
4. Stick the magnet onto the moving part of the door/window, no
further than 5mm from the sensor.
Positioning of the Sensor and the magnet:
Correct postioning of the magnet in relation to the Sensor:
max. 5 mm
PhySICAL InSTALLATIOn
9