Table of Contents
Advertisement
Getting
Started
Starting the software
The 4200 FlexScan FTIR systems are supplied with the Agilent
MicroLab Mobile software, which has already been installed on your
handheld PC.
To start the software once the 4200 FlexScan FTIR has been
powered up:
1
Figure 2. Data station showing power button location
2
If the you see this message upon loading your software:
NOTE
Instrument failed to initialize. Instrument returned error code: -2. The application
will exit; then power-cycle the instrument and restart the application.
the spectrometer is not connected to the computer. When using the handheld PC
with MicroLab Mobile, verify that the instrument displays a green light on the
power button and verify that the 'Bluetooth' communications of the handheld PC
are turned 'On'. The instrument must be connected via Bluetooth for the
MicroLab Mobile software to launch.
14
Turn on the handheld PC data station by depressing the power
button on the top right corner of the data station (see Figure 2).
The system is provided with a shortcut to the MicroLab Mobile
software in the Start menu. Upon initial power-up of the
handheld PC, look in the computer display window and tap
Start. Then tap the MicroLab Mobile icon. This will launch the
MicroLab Mobile software application.
Power button
Agilent 4200 FlexScan FTIR Operation Manual
Advertisement
Table of Contents
