Table of Contents
Advertisement
WARNING
Electrical Shock Hazard
Avoid shock hazard. Never allow liquid to run into the 4200 FlexScan FTIR
battery compartment.
Power switch LED status
The power button contains a two-colored LED. The color displayed
on the LED can indicate the state of the system. The table below lists
the colors of the LED and the status of the instrument.
Table 1. Power switch LED status
Status
System OFF
System OFF
System startup
System ON
Low battery
Critically low battery
Dead battery
Firmware update
The power button is a momentary switch to avoid accidental power off. In order
CAUTION
to turn the system on or off, hold the button down for two (2) seconds.
The 4200 FlexScan FTIR contains a lithium-ion rechargeable battery pack. Agilent
NOTE
has fully charged the 4200 FlexScan system prior to shipment. The 4200 FlexScan
battery life under continuous use is approximately 4 hours.
Agilent 4200 FlexScan FTIR Operation Manual
LED color
No LED illumination
Red
Red / green
Green
Green
Red
No LED illumination
Red / green
Action (% duty cycle)
N/A
100%
Green 0.5 s on / red 0.5 s on
100%
50% (0.5 s on / 0.5 s off)
50% (0.5 s on / 0.5 s off)
N/A
Green blinks rapidly twice then red blinks
rapidly twice
Getting Started
13
Advertisement
Table of Contents
