Inverted Magnetron Pirani Gauge FRG-700 FRG-702
Put the gauge out of operation and unplug the sensor
cable.
Remove the gauge from the vacuum system and place the
protective lid.
6
Maintenance, Troubleshooting
Operating Manual tqna74e1 under www.agilent.com
When deinstalling a CF flange connection, it can be ad-
vantageous to temporarily remove the electronics and
the magnet unit ( 20).
If operated at high pressures or under dirty conditions,
the gauge must be regularly cleaned.
Gauge failures due to contamination or wear and tear,
as well as expendable parts (e.g. seals, filament), are
not covered by the warranty.
28