Table of Contents
Advertisement
PIO-D48 Series Card
48-channel OPTO-22 Compatible DIO Board
Appendix: Daughter Board
A1. DB-37, DN-37, DN-50 and DN-100
DB-37:
The DB-37 is a general purpose daughter board for D-sub 37 pins. It
is designed for easy wire connection via pin-to-pin. Use a 37-pin cable (e.g.
CA-3710 ,etc.) to connect DB-37 to CON1 of the PIO-D48(U)/PEX-D48.
DN-37 and DN-50:
DB-37 pins with DIN-Rail Mountings. The DN-50 is designed for 50-pin
flat-cable headers win DIN-Rail mountings. They are also designed for easy
wire connection via pin-to-pin.
Use a 37-pin cable (e.g. CA-3710 ,etc.) to connect to CN1 of the
PIO-D48(U) and PEX-D48 by DN-37, and then use a 50-pin cable (e.g.
CA-5002 ,etc.) to connect to CN2 by DN-50.
DN-100:
The DN-100 is a general purpose daughter board for SCSI II 100
pins. It is designed for easy wire connection via pin-to-pin. Use a 100-pin
SCSI II cable (e.g. CA-SCSI100-15 ,etc.) to connect DN-100 to CON1 of the
PIO-D48SU.
The DN-37 is a general purpose daughter board for
User Manual/Ver. 3.4/Aug. 2015/PMH-006-34/Page: 49
DB-37
DN-50
DN-37
DN-100
Advertisement
Table of Contents
