Demo Program For Dos - ICP DAS USA PIO-D48 User Manual

PIO-D48 Series Card
48-channel OPTO-22 Compatible DIO Board

7.2 Demo Program for DOS

The demo program is contained in:
CD:\NAPDOS\PCI\PIO-DIO\DOS\D48\PIOD48\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-dio/dos/d48/piod48/
\TC\*.*  for Turbo C 2.xx or above
\MSC\*.*  for MSC 5.xx or above
\BC\*.*  for BC 3.xx or above
 for TC Library
\TC\LIB\*.*
\TC\DEMO\*.*  for TC demo program
\TC\DIAG\*.*  for TC diagnostic program
\TC\LIB\PIO.H
\TC\LIB\TCPIO_L.LIB  TC Large Model Library File
\TC\LIB\TCPIO_H.LIB  TC Huge Model Library File
The list of demo programs:
DEMO1: D/O Demo
DEMO2: D/I Demo
DEMO3: D/I/O Demo
DEMO4: Timer Interrupt of INT_CHAN_3
DEMO5: Event Counter (no interrupt) of INT_CHAN_2 (init_HIGH & active_Low)
DEMO6: Event Counter (no interrupt) of INT_CHAN_2 (init_Low & active_HIGH)
DEMO7: Down-Counter (interrupt) of INT_CHAN_2 (init_HIGH & active_Low)
DEMO8: Interrupt demo of INT_CHAN_0 (PC7 of Port2 don't care)
DEMO9: Interrupt demo of INT_CHAN_0 (PC7 of Port2 interrupt is enable)
DEMO10: Interrupt demo of INT_CHAN_1 (PC7 of Port5 interrupt is disable)
DEMO11: Interrupt demo of INT_CHAN_0 & INT_CHAN_1
For detailed information about the DLL function of the DOS, please refer to PIO-DIO DLL Software
Manual (CD:\NAPDOS\PCI\PIO-DIO\Manual\)
 TC Declaration File
User Manual/Ver. 3.4/Aug. 2015/PMH-006-34/Page: 48