Table of Contents
Advertisement
CHAPTER 5: ASYNCHRONOUS DCE CONFIGURATION
Abbreviating Commands
You can abbreviate command names. You need only type the "unique" part of the name (See
Table F). For example, dial becomes d, and continue becomes con. You can abbreviate option names
in the same way.
Data Option Profiles
List of Data Options
Voice calls require only that you dial a number. Data calls, however, require that your system be
configured with the appropriate data-communication profile so that the data can be sent and received.
Each profile that you use is composed of options that control the operation of the 7500.
The following is a list of the options that determine how the 7500 will operate. The possible values
for each option are listed opposite each option. In most cases, the factory options (printed in bold) will
allow for successful data communications.
Data Option Values (Highlighting Factory Settings)
Table G:
Option
Answer
Attention
Autoadjust
Break
Busyout
Char.erase
DCD
DTR
Echo
Edit
FCPN
Forwarding
Idle.timer
Line.erase
Match.speed
Min.timer
Mode
Parity
Rec.flow
Speed
Text
Trans.flow
Each of the above options is explained in CHAPTER 4: DEFINITIONS OF 7500 OPTIONS.
The values of the entire set of data options make up a data option profile. The following pages
describe how to create and use data option profiles.
80
Possible Values
auto, manual
off, 3 of the same ASCII characters (+++)
on, off
off, attention, interrupt, break, discard, reset
on, off
bs (CtrlH), delete (DEL), off
follow, ignore
follow, ignore
on, off
on, off
on, off
off, cr, any (for all control characters and DEL)
0.0 to 12.75 seconds
can (CtrlX), NAK (CtrlU), off
on, off
on, off
B2, BA, DX25
odd, even, mark, space
eia, xon/xoff, off
300, 1200, 2400, 4800, 9600, 19200
off, diagnostic, verbal
eia, xon/xoff, off
Advertisement
Table of Contents
