CHAPTER 8: INSTALLING THE 7500
Stand-Alone Installations
In this chapter, instructions for stand-alone installations are provided. For these installations, you
will need different pieces of equipment depending on the configuration of your 7500 and of your
network. A complete list is provided below. Asterisked (*) items are required for all installations.
7500 main housing*
Power supply*
D8W Telephone Line Cord*
EIA-232D cable(s) or V.35 cable*
Second Asynchronous Enhancement Board
Multipurpose Enhancement Board
High Speed Synchronous Enhancement Board with V.35 adapter cable
NT1
Terminating Resistor Adaptor
Changing the DCE/DTE flipboard or adding or removing any optional enhancement
board will result in all options being reset to their factory values (p0).
103