Table of Contents
Advertisement
CHAPTER 3: FRONT PANEL FEATURE ACCESS
Setting Options With Help Menu
Figure 14 shows the operation of the Set Options With Help menu. The option and its value are
separated by an equals sign (=) when the display shows the current value; the option and its value are
separated by a right arrow (→) when it shows a possible alternative value. In both cases, a question
mark is displayed after the value itself to indicate that you must make a choice.
Below we describe the front-panel operation for selecting which ports' options to set using the
Asynchronous DCE configuration. If you do not have a second asynchronous board installed skip this
section and proceed to the next section (Setting Options With Help Menu Using Attention as an
Example).
If you have a second asynchronous board installed:
1. Press [
] from the (Home)
NEXT/NO
display until [ SET OPTIONS? ] is
displayed.
2. Press [
ENTER/YES
3. Press [
ENTER/YES
4.
Press [
ENTER/YES
options
OR
press [
] to display
NEXT/NO
[ PORT 1 OPTIONS? ]. Press
[
] to set options on port 1
ENTER/YES
only. (Press [
NEXT/NO
[ PORT 1 OPTIONS? ] is displayed to
display [ PORT 2 OPTIONS? ]. Press
[
] to set options on port 2
ENTER/YES
only.)
30
].
].
] to set both ports'
] when
[ SET OPTIONS ]
is displayed.
[ WITH HELP ? ] is displayed.
[ BOTH PORTS 1 AND 2? ] is displayed.
The first option is displayed. (For example,
[ SET ANSWER? ])
[ PORT 1 OPTIONS? ] is displayed.
The first option is displayed. (For example,
[ SET ANSWER? ])
Advertisement
Table of Contents
