Table of Contents
Advertisement
In addition, the S-registers provide a means of changing or reading selected 7500 options.
To select a particular S-register, type atsm, and [
you want). Until another register is specified, the value of S-register "m" can be read by typing at?
[
]. The value of the S-register "m" can be changed by typing at =value [
RETURN
S-Registers
Table J:
Register
S0
S1
S2
S3
S4
S5
All others
CHAPTER 5: ASYNCHRONOUS DCE CONFIGURATION
S-Register Table
Description
Controls the
0
Answer option
-
-
43 (+++)
ASCII value of
the Attention
sequence
Defines carriage
13 (carriage return)
return
Defines line
10 (line feed)
feed character
08 (backspace)
Defines
backspace
character
] (where the value of "m" is the register
RETURN
Comments
Default
0 = auto
1 = manual
not used
decimal value of
ASCII character
used for Attention
sequence
decimal value of
ASCII character;
used to end
command line and
to end result code
decimal value of
ASCII character;
used after carriage
return only when
verbal result codes
are enabled (see
atvn command in
Table D)
decimal value of
ASCII character
used as backspace
ignored
].
RETURN
93
Advertisement
Table of Contents
