Gpio - Beckhoff CB1064 Series Manual

Internal Connectors

3.4.10 GPIO

The General Purpose Input/Output interface is made available through a 2x10 pin connector. To make
use of this interface the SIO unit must be programmed accordingly. Please refer to your distributor for
information on available software support.
Manufacturer
JST
Description
5 volt supply
GP input/output 10
GP input/output 11
GP input/output 12
GP input/output 13
GP input/output 14
GP input/output 15
GP input/output 16
GP input/output 17
ground
Beckhoff New Automation Technology CB1064-xxxx
Description
B20B-PHDSSLFSN
Name Pin
VCC 1
GPIO10 2
GPIO11 3
GPIO12 4
GPIO13 5
GPIO14 6
GPIO15 7
GPIO16 8
GPIO17 9
GND 10
Name
11 VCC
12 N/C
13 N/C
14 N/C
15 N/C
16 N/C
17 N/C
18 N/C
19 N/C
20 GND
Chapter: Connectors
Mating Connector
PHDR-20VS
Description
5 volt supply
reserved
reserved
reserved
reserved
reserved
reserved
reserved
reserved
ground
page 47