2.1: added CPU All company names, brand names, and product names referred to in this manual are registered or unregistered trademarks of their respective holders and are, as such, protected by national and international law. page 6 Beckhoff New Automation Technology CB4055...
All the components are supplied in particular hardware and software configurations appropriate for the application. Modifications to hardware or software configurations other than those described in the documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH. page 8...
If you do not adhere to the safety advise next to this symbol, there is obvious hazard to individuals, to environment, to materials, or to data. OTE OR POINTER This symbol indicates information that contributes to better understanding. Beckhoff New Automation Technology CB4055 page 9...
Read the operating instructions All users of the product must have read the operating instructions for the system they work with. System know-how All users must be familiar with all accessible functions of the product. page 10 Beckhoff New Automation Technology CB4055...
As far as the described motherboard was acquired as an integral component of an Industrial PC from Beckhoff Automation GmbH, this product description shall be applied only in limited scope. Only the contractually agreed specifications of the corresponding Industrial PC from Beckhoff Automation GmbH shall be relevant.
2 Overview 2.1 Features The CB4055 is a highly complex computer motherboard in the PC/104™ form factor, complying with the state-of-the-art "PCIe/104™" standard. It's based on Intel®'s 2nd Generation Core™ and Celeron® CPUs (BGA, embedded) combined with the QM67 PCH. Modern DDR3 technology provides top-notch memory performance, accomodating up to 4 GByte of RAM (DDR3-1066/1333/1600) via SO-DIMM204.
Page 13
HDA compatible sound controller with SPDIF in and out RTC with external CMOS battery PCI-Express bus via PCI/104-Express connector (type 1, one x16, four x1 lanes) 16x GPIO 5V and 12V supply voltage Size: 96 mm x 90 (115.5) mm Beckhoff New Automation Technology CB4055 page 13...
Page 15
Specifications and Documents Chapter: Overview American Megatrends® Aptio™ Text Setup Environment (TSE) User Manual www.ami.com American Megatrends® Aptio™ 4.x Status Codes www.ami.com Beckhoff New Automation Technology CB4055 page 15...
Chapter: Connectors Specifications and Documents 3 Connectors This section describes all the connectors found on the CB4055. AUTION For most interfaces, the cables must meet certain requirements. For instance, USB 2.0 requires twisted and shielded cables to reliably maintain full speed data rates. Restrictions on maximum cable length are also in place for many high speed interfaces and for power supply.
P1400 "System/SM-Bus" p. 19 P1401 "VGA" p. 27 P1402 "Power Supply" p. 18 P1403 "Monitoring Functions" p. 36 P1404 "GPIO" p. 35 * not in the picture above (cf. bottom side of board) Beckhoff New Automation Technology CB4055 page 17...
AUTION The CB4055 includes circuitry that will notify an intelligent power supply to shut down if the processor reaches a critical temperature. This is achieved by deasserting the (low-active) PS_ON# signal found on the SM-Bus connector. When PS_ON# is no longer pulled low, an intelligent power supply would take this as a signal to shut down power.
16 DQ16 DQ20 data 20 data 17 DQ17 DQ21 data 21 ground ground data strobe 2 - DQS2# data mask 2 data strobe 2 + DQS2 ground ground DQ22 data 22 page 20 Beckhoff New Automation Technology CB4055...
Page 21
41 DQ41 ground ground DQS5# data strobe 5 - data mask 5 DQM5 DQS5 data strobe 5 + ground ground data 42 DQ42 DQ46 data 46 data 43 DQ43 DQ47 data 47 Beckhoff New Automation Technology CB4055 page 21...
Page 22
58 DQ58 DQ62 data 62 data 59 DQ59 DQ63 data 63 ground ground SPD address 0 EVENT# Event 3.3 volt supply 3.3V SMBus data SPD address 1 SMBus clock termination current termination current page 22 Beckhoff New Automation Technology CB4055...
DVI/HDMI Chapter: Connectors 3.6 DVI/HDMI The CB4055 provides a DVI/HDMI interface which is realized as a 2x9pin header (FCI 98424-G52-18LF, mating connector e.g. FCI 90311-018LF). Pinout 2x9pin connector DVI/HDMI: Name Name Description Description HDMI panel detected HPD_SINK reserved SMBus clock (DDC)
Chapter: Connectors DisplayPort 3.7 DisplayPort The CB4055 offers a DisplayPort interface which is realized as 2x10pin connector (TFM-110-02-S-D-WT). This interface can also be operated in HDMI/DVI mode. To achieve this, pin 11 must be connected to 3.3V (e.g. pin 3).
This interface allows the connection of a standard VGA-monitor. I2C communication is supported. Name Name Description Description analog red ground analog green GREEN DDDA DD data analog blue BLUE DDCK DD clock vertikal sync VSYNC ground horizontal sync HSYNC ground Beckhoff New Automation Technology CB4055 page 27...
The LCD is connected via two 15 pin connectors (Hirose DF13-15P-1.25DSA, mating connector: DF13-15S-xxx). The power supply for the display is also provided through these connectors. The CB4055 board only supports displays with LVDS interface. For displays with digital interface an extra receiver board is available.
Page 29
LVDS odd clock - TXO1C LVDS odd clock + TXO13# LVDS odd data 3 - TXO13 LVDS odd data 3 + DDC_CLK EDID clock for LCD DDC_DAT EDID data for LCD 5 volt supply Beckhoff New Automation Technology CB4055 page 29...
USB6 ground ground ground ground plus channel USB7 USB7 USB8 plus channel USB8 minus channel USB7 USB7# USB8# minus channel USB8 5 volt for USB7 USB7VCC USB8VCC 5 volt for USB8 page 30 Beckhoff New Automation Technology CB4055...
LAN0# LAN channel 0 minus LAN channel 3 plus LAN3 LAN2 LAN channel 2 plus LAN channel 3 minus LAN3# LAN2# LAN channel 2 minus LAN speed 100Mbit SPEED100 3.3V 3.3 volt supply Beckhoff New Automation Technology CB4055 page 31...
Audio 3.12 Audio The CB4055's audio functions are provided via a 2x8pin connector (FCI 98424-G52-16LF, mating connector e.g. FCI 90311-016LF). This interface provides eight output channels for full 7.1 sound output. Two microphone inputs and two AUX inputs are also available.
Chapter: Connectors 3.13 SATA Interfaces The CB4055 provides two SATA interfaces allowing transfer rates of up to 6 Gbit per second. These interfaces are made available via two 7 pin connectors. The required settings are made in the BIOS setup.
FCI 90311-010LF). Pinout COM connector: Name Name Description Description data carrier detect data set ready receive data request to send transmit data clear to send data terminal ready ring indicator ground 5 volt supply page 34 Beckhoff New Automation Technology CB4055...
GPIO14 GP input/output 14 GP input/output 05 GPIO05 GPIO15 GP input/output 15 GP input/output 06 GPIO06 GPIO16 GP input/output 16 GP input/output 07 GPIO07 GPIO17 GP input/output 17 3.3 volt supply 3.3V ground Beckhoff New Automation Technology CB4055 page 35...
3.3 volt supply CS-SMB-CLK SMBus clock CS-SMB-DAT SMBus data ground 5 volt supply FANCTRL1 fan 1 monitoring signal FANON1 ground (switched) FANCTRL2 fan 2 monitoring signal FANON2 ground (switched) FANCTRL3 fan 3 (external) monitoring signal page 36 Beckhoff New Automation Technology CB4055...
HD LED Chapter: State LEDs 4 State LEDs 4.1 HD LED Harddisk activity is signalled by a dedicated LED. Beckhoff New Automation Technology CB4055 page 37...
Chapter: State LEDs RGB LED 4.2 RGB LED The CB4055 has an RGB LED, which can signal status messages by using different colors and flash intervals. Status Codes RGB LED: Interval Meaning Color none solid Invalid system state White solid...
They do not represent the recommended settings or the default settings. Determination of the appropriate settings is dependent upon the particular application scenario in which the board is used. Beckhoff New Automation Technology CB4055 page 39...
Name Options: none Brand String Options: none Frequency Options: none Processor ID Options: none Stepping Options: none Number of Processors Options: none Microcode Revision Options: none page 40 Beckhoff New Automation Technology CB4055...
Page 41
Total Memory Options: none Memory Frequency Options: none System Date Options: The system date can be adjusted here. System Time Options: The system time can be adjusted here. Beckhoff New Automation Technology CB4055 page 41...
Super IO Configuration Sub menu: see "Super IO Configuration" (page 53) H/W Monitor Sub menu: see "H/W Monitor" (page 55) Serial Port Console Redirection Sub menu: see "Serial Port Console Redirection" (page 57) page 42 Beckhoff New Automation Technology CB4055...
Page 43
Network Stack Sub menu: see "Network Stack" (page 59) CPU PPM Configuration Sub menu: see "CPU PPM Configuration" (page 60) Intel(R) Gigabit Network Connection Sub menu: see "Intel(R) GigabitNetworkConnection" (page 61) Beckhoff New Automation Technology CB4055 page 43...
Options: none ext. USB-Port Voltage Options: Off in S3-5 / by SVCC int. USB-Port Voltage Options: Off in S3-5 / by SVCC WatchDogTimer Mode Options: Normal Mode / Compatibility Mode page 50 Beckhoff New Automation Technology CB4055...
│ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. Super IO Chip Options: none Serial Port X Configuration Sub menu: see "Serial Port Configuration" (page 54) Beckhoff New Automation Technology CB4055 page 53...
Adapter PBA: Options: none Chip Type Options: none PCI Device ID Options: none PCI Bus:Device:Function Options: none Link Status Options: none Factory MAC Adress Options: none Beckhoff New Automation Technology CB4055 page 61...
Page 62
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. Link Speed Options: Auto Negotiated / 10Mbps Half / 10Mbps full / 100Mbps Half / 100Mbps Full Wake On LAN Options: Enabled / Disabled page 62 Beckhoff New Automation Technology CB4055...
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. PCH-IO Configuration Sub menu: see "PCH-IO Configuration" (page 64) System Agent (SA) Configuration Sub menu: see "System Agent (SA) Configuration" (page 71) Beckhoff New Automation Technology CB4055 page 63...
PCH LAN Controller Options: Disabled / Enabled LAN1 MAC address Options: none Wake on LAN Options: Disabled / Enabled Second LAN Controller Options: Disabled / Enabled LAN2 MAC address Options: none page 64 Beckhoff New Automation Technology CB4055...
Page 65
CLKRUN# Logic Options: Disabled SB CRID Options: Disabled / Enabled High Precision Timer Options: Disabled / Enabled Restore AC Power Loss Options: Power Off / Power On / Last State Beckhoff New Automation Technology CB4055 page 65...
Page 66
DMI Link Extended Synch Control Options: Disabled / Enabled PCIe-USB Glitch W/A Options: Disabled / Enabled Subtractive Decode Options: Disabled PCI Express Root Port X Sub menu: see "PCI Express Settings" (page 67) page 66 Beckhoff New Automation Technology CB4055...
Options: Disabled / Enabled C-State Pre-Wake Options: Disabled / Enabled Graphics Configuration Sub menu: see "Graphics Configuration" (page 72) NB PCIe Configuration Sub menu: see "NB PCIe Configuration" (page 74) Beckhoff New Automation Technology CB4055 page 71...
Page 72
32M / 64M ... 480M / 512M / 1024M DVMT Total Gfx Mem Options: 128M / 256M / MAX Gfx Low Power Mode Options: Disabled / Enabled LCD Control Sub menu: see "LCD Control" (page 73) page 72 Beckhoff New Automation Technology CB4055...
Page 73
ALS Support Options: Disabled / Enabled Active LFP Options: No LVDS / Int-LVDS / SDVO LVDS / eDP Port-A / eDP Port-D Panel Color Depth Options: 18 Bit / 24 Bit Beckhoff New Automation Technology CB4055 page 73...
Page 74
Sub menu: see "PEG Gen3 Root Port Preset Value for each Lane" (page 76) PEG Gen3 Endpoint Preset Value for each Lane Sub menu: see "PEG Gen3 Endpoint Preset Value each Lane" (page 77) page 74 Beckhoff New Automation Technology CB4055...
Page 75
Disabled / Enabled Fast PEG Init Options: Disabled / Enabled RxCEM Loop back Options: Disabled / Enabled RxCEM Loop back lane Options: Lane 0...15 PCIe Gen3 RxCTLEp Setting Options: 0...15 Beckhoff New Automation Technology CB4055 page 75...
Page 76
│ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. Gen3 Root Port Preset Value for each Lane Options: 1..11 page 76 Beckhoff New Automation Technology CB4055...
Page 77
│ESC: Exit │ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. Gen3 Endpoint Preset Value each Lane Options: 0..11 Beckhoff New Automation Technology CB4055 page 77...
Page 78
│ESC: Exit │ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. PEG Gen3 Endpoint Hint Value each Lane Options: 0..11 page 78 Beckhoff New Automation Technology CB4055...
Page 80
Review or change the sequence of available boot devices Boot Option Priorities Options: Review or change the sequence of available boot devices CSM Parameters Sub menu: see "CSM Parameters" (page 81) page 80 Beckhoff New Automation Technology CB4055...
Press [Enter] Delete the KEK Options: Press [Enter] Append an entry to KEK Options: Press [Enter] Set DB from File Options: Press [Enter] Get DB to File Options: Press [Enter] page 84 Beckhoff New Automation Technology CB4055...
Page 85
Press [Enter] Get DBX to File Options: Press [Enter] Delete the DBX Options: Press [Enter] Append an entry to DBX Options: Press [Enter] Install Factory Defaults Options: Press [Enter] Beckhoff New Automation Technology CB4055 page 85...
Chapter: Mechanical Drawings PCB: Mounting Holes 6 Mechanical Drawings 6.1 PCB: Mounting Holes A true dimensioned drawing can be found in the PC/104 specification. All dimensions are in mil (1 mil = 0,0254 mm) page 88 Beckhoff New Automation Technology CB4055...
PCB: Pin 1 Dimensions Chapter: Mechanical Drawings 6.2 PCB: Pin 1 Dimensions All dimensions are in mil (1 mil = 0,0254 mm) Beckhoff New Automation Technology CB4055 page 89...
Chapter: Mechanical Drawings PCB: Heat Sink/Die Center 6.3 PCB: Heat Sink/Die Center All dimensions are in mil (1 mil = 0,0254 mm) page 90 Beckhoff New Automation Technology CB4055...
9 up to 500Hz, 10m/s , for packaged boards AUTION Shock and vibration figures pertain to the motherboard alone and do not include additional components such as heat sinks, memory modules, cables etc. Beckhoff New Automation Technology CB4055 page 91...
AUTION The CB4055 includes circuitry that will notify an intelligent power supply to shut down if the processor reaches a critical temperature. This is achieved by deasserting the (low-active) PS_ON# signal found on the SM-Bus connector.
Please contact your Beckhoff branch office or representative for local support and service on Beckhoff products. The addresses of Beckhoff's branch offices and representatives around the world can be found on her internet pages: http://www.beckhoff.com You will also find further documentation for Beckhoff components there.
(POST code card). The meaning of these codes is described in the document "Aptio™ 4.x Status Codes" by American Megatrends®, which can be downloaded from their website http://www.ami.com. The following additional OEM POST codes are generated: Description Code BIOS-API started PCA9535 started PWRCTRL-Firmware started Beckhoff New Automation Technology CB4055 page 95...
The exclusivity is not given and not possible on the PCI side. Function Address IRQ0 Timer IRQ1 PS/2 Keyboard IRQ2 (9) IRQ3 COM1 IRQ4 COM2 IRQ5 IRQ6 IRQ7 IRQ8 IRQ9 IRQ10 IRQ11 IRQ12 PS/2 Mouse IRQ13 page 96 Beckhoff New Automation Technology CB4055...