BIOS Settings ............................. 45 Remarks for Setup Use ......................45 Top Level Menu .......................... 45 Standard CMOS Features ......................46 4.3.1 SATA channels ........................47 4.3.2 PATA channel ........................48 Advanced BIOS Features ......................49 Beckhoff New Automation Technology CB3052 page 3...
Page 4
Technical Data ........................... 75 Electrical Data ..........................75 Environmental Conditions ......................75 Thermal Specifications ....................... 76 Support and Service .......................... 77 Beckhoff's Branch Offices and Representatives ................ 77 Beckhoff Headquarters ....................... 77 8.2.1 Beckhoff Support ........................ 77 8.2.2 Beckhoff Service ......................... 77 Annex: Post-Codes ..........................
Page 5
Notes on the Documentation Chapter: Document History Beckhoff New Automation Technology CB3052 page 5...
LAN pinout All company names, brand names, and product names referred to in this manual are registered or unregistered trademarks of their respective holders and are, as such, protected by national and international law. page 6 Beckhoff New Automation Technology CB3052...
All the components are supplied in particular hardware and software configurations appropriate for the application. Modifications to hardware or software configurations other than those described in the documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH. page 8...
If you do not adhere to the safety advise next to this symbol, there is obvious hazard to individuals, to environment, to materials, or to data. OTE OR POINTER This symbol indicates information that contributes to better understanding. Beckhoff New Automation Technology CB3052 page 9...
Read the operating instructions All users of the product must have read the operating instructions for the system they work with. System know-how All users must be familiar with all accessible functions of the product. page 10 Beckhoff New Automation Technology CB3052...
As far as the described motherboard was acquired as an integral component of an Industrial PC from Beckhoff Automation GmbH, this product description shall be applied only in limited scope. Only the contractually agreed specifications of the corresponding Industrial PC from Beckhoff Automation GmbH shall be relevant.
Four serial interfaces COM1 to COM4 (COM4 occupied by Touch if present) Two LAN interfaces Ethernet 10/100/1000 (Base-T) Two SATA channels IDE interface PS2 keyboard / mouse interface Eight USB 2.0 interfaces AWARD BIOS 6.10 CRT connection Two DVI/HDMI connectors page 12 Beckhoff New Automation Technology CB3052...
Page 13
Features Chapter: Overview AC97/HDA compatible sound controller with SPDIF in and out RTC with external CMOS battery 5V supply Touchscreen connection (in some variants) Format: 102 mm x 147 mm Beckhoff New Automation Technology CB3052 page 13...
Restrictions on maximum cable length are also in place for many high speed interfaces and for power supply. Please refer to the respective specifications and use suitable cables at all times. page 16 Beckhoff New Automation Technology CB3052...
PSU on PS-ON PWRGD Powergood powerbutton PSU PWRBTN# SVCC standby-supply 5V 12 volt supply 12 volt supply ground ground ground ground 5 volt supply 5 volt supply 5 volt supply 5 volt supply Beckhoff New Automation Technology CB3052 page 19...
3.3 volt supply LED GPIO device LED1 3.3V 3.3 volt supply LED GPIO device LED2 LED3 LED GPIO device speaker to 5 volt SPEAKER KDAT keyboard data standby supply 5 volt (S)VCC KCLK keyboard clock page 20 Beckhoff New Automation Technology CB3052...
For keeping the internal clock alive even if the rest of the board is switched off, an external battery can be attached via a 2 pin connector (JST B2B-EH-A, mating connector: EHR-2). Name Description BATT battery 3.3 volt ground Beckhoff New Automation Technology CB3052 page 21...
16 DQ16 DQ20 data 20 data 17 DQ17 DQ21 data 21 ground ground data strobe 2 - DQS2# data mask 2 data strobe 2 + DQS2 ground ground DQ22 data 22 page 22 Beckhoff New Automation Technology CB3052...
Page 23
41 DQ41 ground ground DQS5# data strobe 5 - data mask 5 DQM5 DQS5 data strobe 5 + ground ground data 42 DQ42 DQ46 data 46 data 43 DQ43 DQ47 data 47 Beckhoff New Automation Technology CB3052 page 23...
Page 24
58 DQ58 DQ62 data 62 data 59 DQ59 DQ63 data 63 ground ground SPD address 0 EVENT# Event 3.3 volt supply 3.3V SMBus data SPD address 1 SMBus clock termination current termination current page 24 Beckhoff New Automation Technology CB3052...
DVI data 0 - TMDSDAT0 DVI data 0 + ground reserved reserved ground TMDS CLK DVI clock TMDS CLK# DVI clock VGA red GREEN VGA green BLUE VGA blue HSYNC VGA horizontal sync Beckhoff New Automation Technology CB3052 page 25...
Page 26
Chapter: Connectors VGA/DVI Name Description ground page 26 Beckhoff New Automation Technology CB3052...
TMDS_D0# TMDS_CLK DVI clock + DVI data 0 + TMDS_D0 ground ground TMDS_D1# DVI data 1 - DVI data 2 - TMDS_D2# TMDS_D1 DVI data 1 + DVI data 2 + TMDS_D2 ground Beckhoff New Automation Technology CB3052 page 27...
Note: In the pinout table below H, X, S, Y, and L are the signal names in the case of 5-wire, XL, XR, YT, and YB are the names in the case of 4-wire. Name Description H-DRV H driver control X/XL-DRV X/XL driver control S/XR-DRV S/XR driver control Y/YT-DRV Y/YT driver control L/YB-DRV L/YB driver control page 28 Beckhoff New Automation Technology CB3052...
Every USB interface provides up to 500 mA current and is protected by an electronically resettable fuse. Pinout USB connector for channel X: Name Description 5 volt for USBX USBX# minus channel USBX USBX plus channel USBX ground Beckhoff New Automation Technology CB3052 page 29...
Pinout 2x5 pin connector USB 7/8 Name Name Description Description 5 volt for USB7 5 volt for USB8 minus channel USB7 USB7# USB8# minus channel USB8 plus channel USB7 USB7 USB8 plus channel USB8 ground ground reserved reserved page 30 Beckhoff New Automation Technology CB3052...
The port address and the interrupt are set via the BIOS setup. Pinout serial port (DSUB connector): Name Name Description Description data carrier detect data set ready receive data request to send transmit data clear to send data terminal ready ring indicator ground page 36 Beckhoff New Automation Technology CB3052...
Alternative pinout of COM-connector when touchscreen feature is present: Name Name Description Description keyboard clock KCLK MCLK mouse clock keyboard data KDAT MDAT mouse data reserved reserved reserved reserved ground 5 volt supply Beckhoff New Automation Technology CB3052 page 37...
Pinout fan connector: Name Name Description Description ground ground 12V regulated fan 1 FANON1 FANON2 12V regulated fan 2 monitoring signal fan 1 FANCTL1 FANCTL2 monitoring signal fan 2 reserved reserved reserved reserved page 44 Beckhoff New Automation Technology CB3052...
(usually somewhere above the disabled item on the same screen). Use the arrow buttons to navigate from one item to another. For selecting an item press Enter which will open either a sub menu or a dialog screen. Beckhoff New Automation Technology CB3052 page 45...
Sub menu: see "PATA channel" (page 48) Halt On Options: All Errors / No Errors / All, But Keyboard Base Memory Options: none Extended Memory Options: none Total Memory Options: none page 46 Beckhoff New Automation Technology CB3052...
Boot Other Device Options: Enabled / Disabled Boot Up NumLock Status Options: Off / On Gate A20 Option Options: Normal / Fast Typematic Rate Setting Options: Enabled / Disabled Beckhoff New Automation Technology CB3052 page 49...
Page 50
MPS Version Control For OS Options: 1.1 / 1.4 OS Select For DRAM > 64MB Options: Non-OS2 / OS2 Full Screen LOGO Show Options: Enabled / Disabled Summary Screen Show Options: Enabled / Disabled page 50 Beckhoff New Automation Technology CB3052...
<Page Up>, <Page Down>, <+> and <-> have a different function than in the rest of the setup: They serve to move the items of the list up or down. page 52 Beckhoff New Automation Technology CB3052...
Sub menu: see "OnChip IDE Devices" (page 56) Onboard Device Sub menu: see "Onboard Devices" (page 58) SuperIO Device Sub menu: see "SuperIO Devices" (page 59) USB Device Setting Sub menu: see "USB Device Setting" (page 60) Beckhoff New Automation Technology CB3052 page 55...
USB Operation Mode Options: Full/Low Speed / High Speed USB Keyboard Function Options: Enabled / Disabled USB Mouse Function Options: Enabled / Disabled USB Storage Function Options: Enabled / Disabled page 60 Beckhoff New Automation Technology CB3052...
Forgotten or lost passwords are a frequent problem. 4.14 Save & Exit Setup Settings are saved and the board is restarted. 4.15 Exit Without Saving This option leaves the setup without saving any changes. page 70 Beckhoff New Automation Technology CB3052...
Chapter: Mechanical Drawings PCB: Mounting Holes 6 Mechanical Drawings 6.1 PCB: Mounting Holes A true dimensioned drawing can be found in the PC/104 specification. All dimensions are in mil (1 mil = 0,0254 mm) page 72 Beckhoff New Automation Technology CB3052...
PCB: Pin 1 Dimensions Chapter: Mechanical Drawings 6.2 PCB: Pin 1 Dimensions All dimensions are in mil (1 mil = 0,0254 mm) Beckhoff New Automation Technology CB3052 page 73...
Chapter: Mechanical Drawings PCB: Heat Sink 6.3 PCB: Heat Sink All dimensions are in mil (1 mil = 0,0254 mm) page 74 Beckhoff New Automation Technology CB3052...
9 up to 500Hz, 10m/s , for packaged boards AUTION Shock and vibration figures pertain to the motherboard alone and do not include additional components such as heat sinks, memory modules, cables etc. Beckhoff New Automation Technology CB3052 page 75...
The end customer has the responsibility to ensure that the die temperature of the processor does not exceed 100°C. Permanent overheating may destroy the board! In case the temperature exceeds 100°C the environmental temperature must be reduced. Under certain circumstances sufficient air circulation must be provided. page 76 Beckhoff New Automation Technology CB3052...
Please contact your Beckhoff branch office or representative for local support and service on Beckhoff products. The addresses of Beckhoff's branch offices and representatives around the world can be found on her internet pages: http://www.beckhoff.com You will also find further documentation for Beckhoff components there.
Test the interrupt Mask bits of IRQ-channel 1 of the interrupt controller 8259. Test the interrupt Mask bits of IRQ-channel 2 of the interrupt controller 8259 Testing the function of the interrupt controller (8259). Initialise EISA slot (if existent). Beckhoff New Automation Technology CB3052 page 79...
Page 80
4. Initialise the ACPI table (top of memory). 5. Initialise and link ROMs on ISA cards 6. Assignment of PCI-IRQs 7. Initialising of the advanced power management (APM) 8. Set back the IRQ-register. page 80 Beckhoff New Automation Technology CB3052...
Page 81
Unpacking of the packed BIOS program codes into the random access memory. Copying of the BIOS program code into the shadow RAM (segments E000 & F000) via chipset hook. Testing of the CMOS read/write functionality Boot trial over boot-loader-routine (software-interrupt INT 19h) Beckhoff New Automation Technology CB3052 page 81...
The exclusivity is not given and not possible on the PCI side. Function Address IRQ0 Timer IRQ1 PS/2 Keyboard IRQ2 (9) COM3 IRQ3 COM1 IRQ4 COM2 IRQ5 COM4 IRQ6 IRQ7 IRQ8 IRQ9 IRQ10 IRQ11 IRQ12 PS/2 Mouse page 82 Beckhoff New Automation Technology CB3052...