Technical Data; Electrical Data; Environmental Conditions - Beckhoff CB1064 Series Manual

Chapter: Technical Data

6 Technical Data

6.1 Electrical Data

Power Supply:
Electric Power Consumption:

6.2 Environmental Conditions

Temperature Range:
Temperature Changes:
Relative Humidity:
Shock:
Vibration:
Notice
page 130
Board:
RTC:
Board:
RTC:
Operating:
Storage:
Shipping:
Operating:
Storage:
Shipping:
Operating:
Storage:
Shipping:
Operating:
Storage:
Shipping:
Operating:
Storage:
Shipping:
Shock and vibration
Shock and vibration figures pertain to the motherboard alone and do not include
additional components such as heat sinks, memory modules, cables etc.
ATX, including 2x2pin 12V connector
>= 3 Volt
typically 10VA (CPU and expansion cards excluded)
<= 10A
0°C to +60°C (extended temperature on request)
-25°C up to +85°C
-25°C up to +85°C, for packaged boards
0.5°C per minute, 7.5°C per 30 minutes
1.0°C per minute
1.0°C per minute, for packaged boards
5% up to 85% (non condensing)
5% up to 95% (non condensing)
5% up to 100% (non condensing), for packaged boards
2
150m/s , 6ms
2
400m/s , 6ms
2
400m/s , 6ms, for packaged boards
10 up to 58Hz, 0.075mm amplitude
58 up to 500Hz, 10m/s
5 up to 9Hz, 3.5mm amplitude
9 up to 500Hz, 10m/s
5 up to 9Hz, 3.5mm amplitude
9 up to 500Hz, 10m/s
Beckhoff New Automation Technology CB1064-xxxx
2
2
2
, for packaged boards
Electrical Data