Page 4
PCB: Dimensions ........................129 Technical Data ..........................130 Electrical Data ........................... 130 Environmental Conditions ......................130 Thermal Specifications ......................131 Support and Service ........................132 Beckhoff's Branch Offices and Representatives ..............132 Beckhoff Support ........................132 page 4 Beckhoff New Automation Technology CB1064-xxxx...
Updated mechanical drawings All company names, brand names, and product names referred to in this manual are registered or unregistered trademarks of their respective holders and are, as such, protected by national and international law. Beckhoff New Automation Technology CB1064-xxxx page 7...
All the components are supplied in particular hardware and software configurations appropriate for the application. Modifications to hardware or software configurations other than those described in the documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG. Beckhoff New Automation Technology CB1064-xxxx...
1.4 FCC Approval for Canada FCC: Canadian Notice This equipment does not exceed the Class A limits for radiated emissions as described in the Radio Interference Regulations of the Canadian Department of Communications. page 10 Beckhoff New Automation Technology CB1064-xxxx...
Read the operating instructions All users of the product must have read the operating instructions for the system they work with. System know-how All users must be familiar with all accessible functions of the product. Beckhoff New Automation Technology CB1064-xxxx page 11...
As far as the described motherboard was acquired as an integral component of an Industrial PC from Beckhoff Automation GmbH & Co. KG, this product description shall be applied only in limited scope. Only the contractually agreed specifications of the corresponding Industrial PC from Beckhoff Automation GmbH &...
2x GBit-LAN, Intel® i219/i210 1x COM Graphics HDMI1.4: 2560x1600@60Hz; 4096x2160@24Hz DisplayPort: 4096x2304@60Hz DVI: 1920x1200@60Hz Internal or external CMOS battery BIOS AMI® Aptio V Power Supply Standard ATX PSU Format ATX (305mm x 220mm) page 14 Beckhoff New Automation Technology CB1064-xxxx...
Restrictions on maximum cable length are also in place for many high Notice speed interfaces and for power supply. Please refer to the respective specifications and use suitable cables at all times. page 16 Beckhoff New Automation Technology CB1064-xxxx...
5 volt supply ground ground ground ATX Powergood PWRGOOD 8 volt supply -5V standby supply 5V SVCC 5 volt supply 12 volt supply 5 volt supply 12 volt supply 5 volt supply Beckhoff New Automation Technology CB1064-xxxx page 17...
Page 18
Chapter: Connectors Power Supply, System Connectors, CPU Description Name Name Description 3.3 volt supply 3.3V ground page 18 Beckhoff New Automation Technology CB1064-xxxx...
Once the processor is in place, the clamping bracket must be fixed to ensure proper electrical contact. In case of improper insertion of the processor contacts can bend and therefore be damaged. Processors must be ordered separately. The board ships without a CPU. Notice page 20 Beckhoff New Automation Technology CB1064-xxxx...
The board ships with a CR2032 battery holder and 3V battery. Alternatively, an external battery can be connected via a 2pin connector. Manufacturer Description Mating Connector RenataSA VBH2032-1 (battery) 2pin connector for external battery: Manufacturer Description Mating Connector B 2B-EH-A(LF)(SN) JST 02HR-6S-P-N Name Description BATT battery 3.3 volt ground Beckhoff New Automation Technology CB1064-xxxx page 21...
DVI data 1 - TMDSDAT1 DVI data 1 + ground reserved reserved 5 volt supply ground HP_DETECT hot plug detect TMDSDAT0# DVI data 0 - TMDSDAT0 DVI data 0 + ground reserved reserved page 22 Beckhoff New Automation Technology CB1064-xxxx...
Page 23
Back Panel Connectors Chapter: Connectors Name Description ground TMDS CLK DVI clock + TMDS CLK# DVI clock - reserved reserved reserved reserved ground Beckhoff New Automation Technology CB1064-xxxx page 23...
TMDS_D0# TMDS_CLK DVI clock + DVI data 0 + TMDS_D0 ground ground TMDS_D1# DVI data 1 - DVI data 2 - TMDS_D2# TMDS_D1 DVI data 1 + DVI data 2 + TMDS_D2 ground page 24 Beckhoff New Automation Technology CB1064-xxxx...
DSUB connector Pinout serial port (DSUB connector): Description Name Name Description data carrier detect data set ready receive data request to send transmit data clear to send data terminal ready ring indicator ground Beckhoff New Automation Technology CB1064-xxxx page 27...
Chapter: Connectors Back Panel Connectors 3.2.7 Audio Connectors Line-in, line-out, and microphone signals are provided in the form of three 3,5mm-TRS-connectors. page 30 Beckhoff New Automation Technology CB1064-xxxx...
The CB1064 provides six SATA interfaces. They all support transfer rates of 1,5Gbit/s up to 6Gbit/s. Pinout SATA: Name Description ground SATATX SATA transmit + SATATX# SATA transmit - ground SATARX SATA receive - SATARX# SATA receive + ground Beckhoff New Automation Technology CB1064-xxxx page 31...
Data lane 14 Ground Ground Data lane 10 DQ10 DQ11 Data lane 11 Ground Ground Data lane 21 DQ21 DQ20 Data lane 20 Ground Ground Data lane 17 DQ17 DQ16 Data lane 16 Ground Ground page 32 Beckhoff New Automation Technology CB1064-xxxx...
Page 33
Chip Select 0 CS0_n Bank Adress 0 Address lane 14/Write A14/WE_n A16/RAS_n Address lane 16/Row Enable Address Strobe Power supply 1,2V Power supply 1,2V On Die Termination 0 ODT0 A15/CAS_n Address lane 15/Column Address Strobe Beckhoff New Automation Technology CB1064-xxxx page 33...
Page 34
Data lane 58 DQ58 DQ59 Data lane 59 Ground Ground SMBus Clock SMBus Data I²C Power for SPD EEProm VCCSPD SPD address 0 DRAM Activating Power Termination voltage DRAM Activating Power SPD address 1 page 34 Beckhoff New Automation Technology CB1064-xxxx...
Pinout 2x5 pin connector USB x/y: Description Name Name Description 5 volt for USBx 5 volt for USBy minus channel USBx USBx# USBy# minus channel USBy plus channel USBx USBx USBy plus channel USBy ground ground reserved reserved Beckhoff New Automation Technology CB1064-xxxx page 35...
71600-610LF Pinout COM connector: Description Name Name Description data carrier detect data set ready receive data request to send transmit data clear to send data terminal ready ring indicator ground 5 volt supply page 36 Beckhoff New Automation Technology CB1064-xxxx...
(Foxconn HF1104E-P1), providing customers with even more possibilities to connect audio devices (analogue signals). Pinout CD-in connector: Name Description CD_L CD left channel CD_GND CD ground CD_GND CD ground CD_R CD right channel Beckhoff New Automation Technology CB1064-xxxx page 37...
IDC socket connector with a spacing of 2,54mm. Manufacturer Description Mating Connector Samtec TSW-103-07-S-D e.g. (XXX)-103-01-T-D Pinout SPDIF connector: Description Name Name Description ground SPDIFO SPDIF out 3.3 volt supply 3,3V 5 volt supply ground SPDIFI SPDIF in page 38 Beckhoff New Automation Technology CB1064-xxxx...
Name Description 3.3 volt supply 3.3V ground SMBus clock SMBCLK SMBDAT SMBus data SMBus alarm SMBALRT# 3 SVCC standby supply 5V I2C bus clock I2CLK I2DAT I2C bus data 5 volt supply ground page 46 Beckhoff New Automation Technology CB1064-xxxx...
For this to work the fans must provide a corresponding speed signal. Manufacturer Description Mating Connector Molex 22-23-2031 e.g. 22-01-2037 Pinout fan connector: Name Description ground 12 volt supply regulated TACHO fan monitoring signal The FAN4 connector doesn't have pin 3 connected (N/C). Notice page 48 Beckhoff New Automation Technology CB1064-xxxx...
BIOS setup back to default values, it also clears the date and Notice time information stored in CMOS. So don't forget that, after the Clear CMOS procedure, you will have to set the clock again. Beckhoff New Automation Technology CB1064-xxxx page 49...
VCC or standby power supply SVCC. You can switch between the two by using the KBPWR jumper. For VCC you need to short pins 1 and 2, for SVCC please short pins 2 and 3. page 50 Beckhoff New Automation Technology CB1064-xxxx...
Setup-Menüs im Folgenden gezeigten Hinweis Einstellungen nicht notwendigerweise die empfohlenen oder die Default-Einstellungen sind. Welche Einstellungen gewählt werden müssen, hängt jeweils vom Anwendungsszenario ab, in dem das Board betrieben wird. Beckhoff New Automation Technology CB1064-xxxx page 51...
Options: none Name Options: none Type Options: none Speed Options: none ID Options: none Stepping Options: none Number of Processors Options: none Microcode Revision Options: none Seite 52 Beckhoff New Automation Technology CB1064-xxxx...
Page 53
Total Memory Options: none Memory Frequency Options: none System Date Options: The system date can be adjusted here. System Time Options: The system time can be adjusted here. Beckhoff New Automation Technology CB1064-xxxx Seite 53...
ACPI Settings Sub menu: see "ACPI Settings" (page 71) SCH3114 Super IO Configuration Sub menu: see "SCH3114 Super IO Configuration" (page 72) H/W Monitor Sub menu: see "H/W Monitor" (page 74) Seite 54 Beckhoff New Automation Technology CB1064-xxxx...
Page 55
USB Configuration Sub menu: see "USB Configuration" (page 86) SATA and RST Configuration Sub menu: see "SATA and RST Configuration" (page 87) AMT Configuration Sub menu: see "AMT Configuration" (page 91) Beckhoff New Automation Technology CB1064-xxxx Seite 55...
Disabled / Enabled Wake up hour Options: 0..23 Wake up minute Options: 0..59 Wake up second Options: 0..59 ACPI Debug Options: Disabled / Enabled ACPI Memory Buffer Address Options: none Seite 56 Beckhoff New Automation Technology CB1064-xxxx...
Page 57
PEP Constraints Configuration Sub menu: see "PEP Constraints Configuration" (page 58) Lpit Recidency Counter Options: SLP S0 / C10 PCI Delay Optimization Options: Disabled / Enabled ZpODD Support Options: Disabled / Enabled Beckhoff New Automation Technology CB1064-xxxx Seite 57...
Page 58
PEP I2C1 Options: Disabled / Enabled PEP I2C2 Options: Disabled / Enabled PEP I2C3 Options: Disabled / Enabled PEP I2C4 Options: Disabled / Enabled PEP I2C5 Options: Disabled / Enabled Seite 58 Beckhoff New Automation Technology CB1064-xxxx...
Page 59
PEP SPI Options: Disabled / Enabled PEP XHCI Options: Disabled / Enabled PEP Audio Options: Disabled / Enabled PEP EMMC Options: Disabled / Enabled PEP SDXC Options: Disabled / Enabled Beckhoff New Automation Technology CB1064-xxxx Seite 59...
Page 61
Active Processor Cores Options: Hyper-threading Options: Enabled / Disabled CPU AES Options: Disabled / Enabled CPU - Power Management Control Sub menu: see "CPU - Power Management Control" (page 62) Beckhoff New Automation Technology CB1064-xxxx Seite 61...
Chip Type Options: none PCI Device ID Options: none PCI Address Options: none Link Status Options: none MAC Address Options: none Virtual MAC Address Options: none Seite 64 Beckhoff New Automation Technology CB1064-xxxx...
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Link Speed Options: Auto Negotiated / 10Mbps Half / 10Mbps full / 100Mbps Half / 100Mbps Full Wake On LAN Options: Enabled / Disabled Beckhoff New Automation Technology CB1064-xxxx Seite 65...
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Intel(R) Gigabit 0.0.16 Sub menu: see "Intel(R) Gigabit 0.0.16" (page 67) Intel(R) PRO/1000 7.3.20 PCI-E Sub menu: see "Intel(R) PRO/1000 7.3.20" (page 69) Beckhoff New Automation Technology CB1064-xxxx Seite 67...
Page 68
│ │ESC: Exit │ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Controller 899dd918 Child 0 Healthy Options: none Seite 68 Beckhoff New Automation Technology CB1064-xxxx...
Page 69
│ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Controller 899de498 Child 0 Healthy Options: none Intel(R) I210 Gigabit Network Connection Options: none Beckhoff New Automation Technology CB1064-xxxx Seite 69...
│ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Serial Port X Configuration Sub menu: see "Serial Port X Configuration" (page 73) Seite 72 Beckhoff New Automation Technology CB1064-xxxx...
Page 80
Disabled / 4 K / 8 K / 16 K / 32 K PFMMIO 32 bit Resources Options: Disabled / 1 M / 2 M / 4 M / 8 M / 16 M / 32 M / 64 M / 64 M Seite 80 Beckhoff New Automation Technology CB1064-xxxx...
Options: none ext. USB-Port Voltage Options: Off in S3-5 / by SVCC int. USB-Port Voltage Options: Off in S3-5 / by SVCC WatchDogTimer Mode Options: Normal Mode / Compatibility Mode Seite 82 Beckhoff New Automation Technology CB1064-xxxx...
Do not launch / UEFI only / Legacy only Video Options: Do not launch / UEFI only / Legacy only Other PCI devices Options: Do not launch / UEFI / Legacy Seite 84 Beckhoff New Automation Technology CB1064-xxxx...
Default / Gen1 / Gen2 / Gen3 Serial ATA Port X Options: none Software Preserve Options: none Port X Options: Enabled / Disabled Hot Plug Options: Enabled / Disabled Beckhoff New Automation Technology CB1064-xxxx Seite 87...
Page 88
Unknown / ISATA / Direct Connect / Flex / M2 SATA Port X DevSlp Options: Disabled / Enabled DITO Configuration Options: Disabled / Enabled DITO Value Options: 0..1023 DM Value Options: 0..15 Seite 88 Beckhoff New Automation Technology CB1064-xxxx...
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. System Agent (SA) Configuration Sub menu: see "System Agent (SA) Configuration" (page 98) PCH-IO Configuration Sub menu: see "PCH-IO Configuration" (page 110) Beckhoff New Automation Technology CB1064-xxxx Seite 97...
DVMT Pre-Allocated Options: 32M / 64M ... 480M / 512M / 1024M DVMT Total Gfx Mem Options: 128M / 256M / MAX Gfx Low Power Mode Options: Disabled / Enabled Beckhoff New Automation Technology CB1064-xxxx Seite 99...
Page 100
Cd Clock Frequency Options: 337.5 Mhz / 450 Mhz / 540 Mhz / 675 Mhz IUER Button Enable Options: Enabled / Disabled LCD Control Sub menu: see "LCD Control" (page 102) Seite 100 Beckhoff New Automation Technology CB1064-xxxx...
Page 101
│ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Primary PEG Options: Auto / PEG11 / PEG 12 Primary PCIE Options: Auto / PCIE1 / PCIE2 / ... / PCIE7 Beckhoff New Automation Technology CB1064-xxxx Seite 101...
Page 102
Backlight Control Options: PWM Inverted / PWM Normal Active LFP Options: No eDP / eDP Port-A Panel Color Depth Options: 18 Bit / 24 Bit Backlight Brightness Options: 0..255 Seite 102 Beckhoff New Automation Technology CB1064-xxxx...
Page 103
4K / 8K / 12K / 16K / 20K PEG Port Feature Configuration Sub menu: see "PEG Port Feature Configuration" (page 105) Program PCIe ASPM after OpROM Options: Enabled / Disabled Beckhoff New Automation Technology CB1064-xxxx Seite 103...
Page 104
Generate BDAT Margin DATA Options: Disabled / Generate Port Jitter Data PCIe Rx CEM Test Mode Options: Disabled / Enabled PEG Lane Number for Test Options: 0..15 Non-Protocol Awareness Options: Disabled / Enabled Seite 104 Beckhoff New Automation Technology CB1064-xxxx...
Page 105
│ │ESC: Exit │ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Detect Non-Compliance Device Options: Disabled / Enabled Beckhoff New Automation Technology CB1064-xxxx Seite 105...
Page 106
│ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Gen3 Root Port Preset Value for each Lane Options: 1..11 Seite 106 Beckhoff New Automation Technology CB1064-xxxx...
Page 107
│ESC: Exit │ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Gen3 Endpoint Preset Value each Lane Options: 0..11 Beckhoff New Automation Technology CB1064-xxxx Seite 107...
Page 108
│ESC: Exit │ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. PEG Gen3 Endpoint Hint Value each Lane Options: 0..11 Seite 108 Beckhoff New Automation Technology CB1064-xxxx...
Page 109
│ │ESC: Exit │ │ │ │ │ │ │ │ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. PCIe Gen3 RxCTLEp Setting x Options: 0..15 Beckhoff New Automation Technology CB1064-xxxx Seite 109...
Options: Disabled / Enabled in S4-S5 LAN Wake From DeepSx Options: Disabled / Enabled Wake on LAN Options: Disabled / Enabled SLP_LAN# Low on DC Power Options: Disabled / Enabled Seite 110 Beckhoff New Automation Technology CB1064-xxxx...
Page 111
S0 State / S5 State Compatible Revision ID Options: Disabled / Enabled PCH Cross Throttling Options: Disabled / Enabled PCIe Pll SSC Options: Auto / 0.0% / 0.1% / 0.2% / ... / 2.0% Beckhoff New Automation Technology CB1064-xxxx Seite 111...
Page 112
Disabled / Enabled PCI Express Gen3 Eq Lanes Sub menu: see "PCI Express Gen3 Eq Lanes" (page 113) PCI Express Root Port X Sub menu: see "PCI Express Root Port" (page 114) Seite 112 Beckhoff New Automation Technology CB1064-xxxx...
Page 113
│ │ PCIE12 Cp ░│ │ │ PCIE13 Cm ░│ │ │ ▼│ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. PCIEX Cm Options: 0..63 PCIEX Cp Options: 0..63 Beckhoff New Automation Technology CB1064-xxxx Seite 113...
│ │ │ │ │ │ └─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Administrator Password Options: Press [Enter] Secure Boot menu Sub menu: see "Secure Boot Menu" (page 121) Seite 120 Beckhoff New Automation Technology CB1064-xxxx...
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Secure Boot Support Options: Disabled / Enabled Secure Boot Mode Options: Standard / Custom Key Management Sub menu: see "Key Management" (page 122) Beckhoff New Automation Technology CB1064-xxxx Seite 121...
Set New Key / Append Key Forbidden Signatures Options: Set New Key / Append Key Authorized TimeStamps Options: Set New Key / Append Key OsRecovery Signatures Options: Set New / Append Seite 122 Beckhoff New Automation Technology CB1064-xxxx...
Options: Disabled / Enabled NetWork Stack Driver Support Options: Disabled / Enabled Redirection Support Options: Disabled / Enabled New Boot Option Policy Options: Default / Place First / Place Last Beckhoff New Automation Technology CB1064-xxxx Seite 123...
Page 124
Legacy / UEFI / DUAL Fixed Boot Order Priorities Options: Review or change the sequence of available boot devices Advanced Fixed Boot Order Parameters Sub menu: see "Fixed Boot Order Priority" (page 125) Seite 124 Beckhoff New Automation Technology CB1064-xxxx...
BIOS file which was issued for the exact board and exact board revision that you wish to update. If you try to update the BIOS using the wrong file the board will not start up again. Beckhoff New Automation Technology CB1064-xxxx Seite 127...
9 up to 500Hz, 10m/s , for packaged boards Shock and vibration Shock and vibration figures pertain to the motherboard alone and do not include additional components such as heat sinks, memory modules, cables etc. Notice page 130 Beckhoff New Automation Technology CB1064-xxxx...
Since we take thermal solutions seriously we have several advanced, aggressive cooling solutions in our product portfolio. Please contact your sales representative to order or discuss your thermal solution needs. Beckhoff New Automation Technology CB1064-xxxx page 131...
Please contact your Beckhoff branch office or representative for local support and service on Beckhoff products. The addresses of Beckhoff's branch offices and representatives around the world can be found on her internet pages: http://www.beckhoff.com You will also find further documentation for Beckhoff components there.
(POST code card). The meaning of these codes is described in the document "Aptio™ 4.x Status Codes" by American Megatrends®, which can be downloaded from their website http://www.ami.com. The following additional OEM POST codes are generated: Code Description BIOS-API started PCA9535 started PWRCTRL-Firmware started page 134 Beckhoff New Automation Technology CB1064-xxxx...