Set From Web Gui; 7-Way Conference; Initiating Conference; Figure 39 Gac2500 Call Forward Mode On Web Gui - Grandstream Networks GAC2500 User Manual

http://arttel.ru

Time based: Forward calls based on the time range.

Busy: Forward calls when an active call exists.

No-answer: Forward calls when phone is not answered.

SET FROM WEB GUI

Log in the Web GUI and go to Account->Call Settings to find Call Forward option as shown below and
specifies the call forward mode in the drop-down list.

7-WAY CONFERENCE

The GAC2500 supports up to 7-way conference. The GAC2500 can be the host to initiate a conference or
join other conferences as a party.

INITIATING CONFERENCE

The conference can be initiated from dial screen, or start conference from schedule.
The following steps introduces the 2 ways to start conference from dial screen, please refer to chapter
Schedule for more details about initiating conference from schedule.

Enter multiple numbers in the text box or select parties from the list below.
1. Access dial screen when the phone is on idle;
2. Set call mode and select account;
3. Enter digits in the textbox;
4. Tap on the matching phone number on the left to add it to the textbox, you can add multiple numbers.
5. Repeat the steps 3-4 to add more numbers;
6. Tap on

Press
1. Access dial screen when the phone is on idle;
2. Tap on Conf button
Firmware Version 1.0.1.18
http://arttel.ru/shop/ip-telefony/grandstream-gac2500

Figure 39 GAC2500 Call Forward Mode On Web GUI

to dial out.
to access conference page, then tap on
or the icon
GVC2500 User Guide
to add parties.
on desktop to access conference page as shown below;
Page 50 of 98