Figure 46 Gac2500 Add Conference Screen - Grandstream Networks GAC2500 User Manual

http://arttel.ru
2. Tap on
3. Fill in conference name, members, start time, conference duration, etc.;
4. Tap on
Table 11 GAC2500 Add Conference Parameters
Parameters
Conference Name
Members of
Conference
Cycle Conference
Conference Date
Time Zone
Start Time
Duration (Min)
Reminder Time
Auto Conference
Firmware Version 1.0.1.18
http://arttel.ru/shop/ip-telefony/grandstream-gac2500
on the upper right corner to access "Add Conference" screen as below.

Figure 46 GAC2500 Add Conference Screen

to save the scheduled conference and go back to schedule screen.
Descriptions
Set the conference name to identify this conference.
Click on button to access the Add Member screen. You can add one member
or a group of members. Tap on
back to Add Conference screen. Up to 6 members can be added.
Set conference cycle.
Configure the date when the conference starts. It should not be earlier than the
current date.
Configure conference time zone.
Configure the time when the conference starts. It should not be earlier than the
current time.
Configure conference duration.
Configure whether to remind users in advance. A prompt dialog box will pop up on
the GAC2500 screen before the conference starts.
Configure whether to initiate conference when the conference time comes. If
disabled, a prompt dialog box will pop up on the GAC2500 screen 10 minutes before
the conference starts to reminder users whether to start conference.
GVC2500 User Guide
on the upper right corner to save and go
Page 56 of 98