Vlan Settings; Lldp Settings; 802.1X Mode; Table 7 Gac2500 Vlan Configuration Parameters - Grandstream Networks GAC2500 User Manual

http://arttel.ru

VLAN SETTINGS

Access GAC2500 home screen, go to Applications->Settings->Network->VLAN to configure VLAN
settings on the GAC2500.

Table 7 GAC2500 VLAN Configuration Parameters

Parameters
Layer 2 QoS
802.1q/VLAN Tag
Layer 2 QoS
802.1p Priority

LLDP SETTINGS

Access GAC2500 home screen, go to Applications ->Settings ->Network->LLDP to configure LLDP
settings on the GAC2500.

Table 8 GAC2500 LLDP Configuration Parameters

Parameters
LLDP
Layer 3 QoS for
SIP
Layer 3 QoS for
Audio
Layer 3 QoS for
Video

802.1X MODE

Access GAC2500 home screen, go to Applications ->Settings ->Network->802.1X Mode. By default
802.1X is disabled. Select 802.1X mode to "EAP-MD5", "EAP-TLS5" or "EAP-PEAP" to turn on 802.1X.
Once 802.1X mode is enabled, the user will be required to enter the identity and Password to be
authenticated in the network.
Firmware Version 1.0.1.18
http://arttel.ru/shop/ip-telefony/grandstream-gac2500
Descriptions
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The default value is
0.
Note:
Please do not change the setting before understanding the VLAN's settings or
consulting the network administrator. Otherwise, the device might not be able to get
the correct IP address.
Assigns the priority value of the Layer 2 QoS packets. The default value is 0.
Descriptions
Enable or disable LLDP. The default setting is disabled.
This field defines the layer 3 QoS parameter for SIP packets. It is the value used for
IP Precedence, Diff-Serv or MPLS. The Default value is 48.
This field defines the layer 3 QoS parameter for audio packets. It is the value used
for IP Precedence, Diff-Serv or MPLS. The Default value is 48.
This field defines the layer 3 QoS parameter for video packets. It is the value used
for IP Precedence, Diff-Serv or MPLS. The Default value is 48;
GVC2500 User Guide Page 37 of 98