Manufacturer Approved Cleaning Materials - Datalogic Magellan 3500HSi Quick Reference Manual

Manufacturer Approved Cleaning Materials

Datalogic recommends the use of the following cleaners on its
products.
• Hydrogen Peroxide (not to exceed a 3% solution)
• Chlorine bleach (not to exceed a 0.25% solution)
• Mild detergent and water
• lsopropyl Alcohol (not to exceed a 70% solution)
Use of above cleaners
not recommended and may constitute a health hazard.
Follow all specified safety precautions when using any
cleaning solution.
CAUTION
Under no circumstances should abrasive cleansers, abrasive
pads, caustic solutions or other harsh chemicals, including those
listed below, be used on any part of the scanner as they can
cause damage which will adversely affect scanning and weighing
performance. Use of such materials, either alone or in combina-
tion with other cleaning agents, will void the manufacturer' s war-
ranty.
!!DO NOT USE!!
• Ammonia solu-
tions
• Acetone
• Benzene
• Ethanolamine
• Ethers
• Ketones
Quick Reference Guide
APPROVED CLEANERS
• Trichloroethylene
• Toluene
• Carbolic acid
• Aromatic or chlorinated hydrocarbons
• Aqueous or alcoholic alkaline solutions
in combination with each other
is
15