Background Music - Siemens FIREFINDER-XLS Installation, Operation And Maintenance Manual

Hide thumbs Also See for FIREFINDER-XLS:
Table of Contents

Advertisement

FIREFINDER-XLS INSTALLATION, OPERATION AND MAINTENANCE MANUAL

Background Music

4-12
VOICE SYSTEM
10. All Speaker Group switch LEDs turn from steady green to flashing green.
11.
To return the system to normal, the operator first depresses the selected
Speaker Group switches, then Select Page. If these switches are not
deselected, the system will return to normal automatically in approximately
1-2 minutes and turn off the Select Page and selected Speaker Group LEDs.
The Background Music operation consists of the following functions which are
described below: All Background Music and Select Background Music.
All Background Music
All Background Music sends the background music, with a single switch press, from
an audio source (CD player, tuner or tape recorder, etc.) to all speaker groups in the
system.
To select All Background Music, follow the steps listed below.
1.
Turn on the background music source.
2.
Depress the All Background Music switch.
3.
The All Background Music, Display Background Music, Select Background
Music and the Speaker Group switch LEDs turn on steady green.
4.
All speaker groups sound background music.
5.
After 120 seconds the Speaker Group switch LEDs turn off and the Display
Background Music switch LED automatically turns on.
6.
To end the background music depress the All Background Music switch
again.
7 .
The All Background Music, the Display Background Music, Select Back-
ground Music and the Speaker Group switch LEDs turn off.
Select Background Music
Select Background Music sends the background music from an audio source (CD
player, tuner or tape recorder, etc.) to selected speaker groups in the system.
To select Select Background Music, follow the steps listed below.
1.
Turn on the background music source.
2.
Depress the Select Background Music switch. The LED turns on steady
green.
3.
Depress the desired individual Speaker Group switches.
4.
If no Speaker Group switches are pressed for 120 seconds, the system
automatically returns to normal.
5.
The Display Background Music and the selected Speaker Group LEDs are
on steady green.
6.
The selected Speaker Groups sound background music.
7 .
After 120 seconds the Select Background Music and Speaker Group switch LEDs
turn off and Display Background Music switch LED automatically turns on.
| CHAPTER 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents