Setup Of Parameter And Mode; Outline / Setup / Connection - Panasonic MINAS A5 Series Operating Instructions Manual

2
Preparation
Outline of Parameter
This driver is equipped with various parameters to set up its characteristics and functions.
This section describes the function and purpose of each parameter. Read and compre-
hend very well so that you can adjust this driver in optimum condition for your running
requirements.
Setup of Parameter
1) front panel of the driver
2) combination of the setup support software, "PANATERM" and PC.
Note How to control the front panel, refer to P.2-86.
Setup with the PC
It is possible to connect your personal computer to connector X1 of MINAS A5 using a
USB cable for personal computer connection. Downloading the setup support software
"PANATERM" from our web site and installing it on your personal computer will allow you
to perform the following easily.
1) Setup and storage of parameters, and writing to the memory (EEPROM).
2) Monitoring of I/O, pulse input and load factor.
3) Display of the present alarm and reference of the error history.
4) Data measurement of the wave-form graphic and bringing of the stored data.
5) Normal auto-gain tuning
6) Frequency characteristic measurement of the machine system.
Note Because no production software such as CD-ROM is available, download the setup sup-
port software from our web site and install it on your personal computer.
On the driver, use commercially available USB mini-B connector.
cations of the PC.
to both ends of the cable.
Related page
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2-72

13. Setup of Parameter and Mode

Outline / Setup / Connection

Connect to X1
(USB mini-B)
Setup support software "PANATERM"
Please download from our web site and
use after install to the PC.
-