Vecow EVS-1000 User Manual page 87

4.4.2.2 SATA and RST Configuration
Figure 4-4-2-2 : SATA And RST Settings
SATA Controller (s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controller (s) operate.
Software Feature Mask Configuration
RAID OROM/RST driver will refer to the SWFM configuration to enable or
disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
SATA Controller Speed
Indicates the maximum speed the SATA controller can support.
Options for each SATA port :
Port n
Enable or disable SATA Port.
Hot Plug
Designated this port as Hot Pluggable.
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
SATA Device Type
Identifies that the SATA port is connected to solid state drive or hard disk drive.
Topology
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2.
©Vecow EVS-1000/1100 User Manual BIOS AND DRIVER SETTING 80