Thermo Scientific Orion Dual Star User Manual page 63

Thermo Scientific
1. In the measurement mode, press the log view key.
2. Press the ▲ / ▼ keys to highlight Data Log and press the f2 (accept) key. The meter will
display a list of the data points. The list shows the sequential number of the data point
(D0001), the date that the data point was saved (07/05/2008) and the time that the data
point was saved (14:05).
3. To view the measurement information for an individual data point, press the ▲ / ▼ keys to
highlight the data point and press the f2 (select) key. Press the f2 (print) key to print the data
point or press the f1 (back) key to return to the list of data points.
4. To export the data log to a computer or printer, press the f3 (options) key, press the ▲ / ▼
keys to highlight Log Export and press the f2 (accept) key. Press the ▲ / ▼ keys to
highlight Today, Last 10, Range or All as the data log points to be exported and press the
f2 (accept) key.
a. If Today, Last 10 or All is selected, press the f2 (yes) key to export the data. After
exporting the data, the meter will automatically return to the measurement mode.
b. If Range is selected, use the numeric keypad to enter the number of the first data point
to be exported, press the f2 (accept) key, use the numeric keypad to enter the number
of the last data point to be exported, press the log/print key and press the f2 (yes) key
to export the data. After exporting the data, the meter will automatically return to the
measurement mode.
c. To clear the data log, press the f3 (options) key, press the ▲ / ▼ keys to highlight Log
Clear and press the f2 (accept) key. Press the f2 (yes) key to clear the entire data log.
Enter the password using the alphanumeric keypad and press the f2 (accept) key. The
default password is 111111111. Press the f1 (back) key to return to the list of data
points.
5. Press the f1 (back) key twice to return to the measurement mode.
Data Storage and Retrieval
Orion Dual Star pH/ISE Benchtop Meter User Manual
Section 7
|
63
|