Thermo Scientific Orion Dual Star User Manual page 61

Thermo Scientific
f2 (select) key. Press the ▲ / ▼ keys to highlight On and press the f2 (accept) key.
Press the ▲ / ▼ keys to highlight Baud Rate and press the f2 (select) key. Press the
▲ / ▼ keys to highlight 1200, 2400, 4800, 9600, 19200 or 38400 as the baud rate and
press the f2 (accept) key. Once computer settings are entered, press the f1 (back) key.
b. To enable communication to a printer, press the ▲ / ▼ keys to highlight Printer and
press the f2 (select) key. Press the ▲ / ▼ keys to highlight Printer On/Off and press the
f2 (select) key. Press the ▲ / ▼ keys to highlight On and press the f2 (accept) key.
Press the ▲ / ▼ keys to highlight Baud Rate and press the f2 (select) key. Press the
▲ / ▼ keys to highlight 1200, 2400, 4800, 9600, 19200 or 38400 as the baud rate and
press the f2 (accept) key. Once the printer settings are entered, press the f1 (back) key.
c. To disable communication to a computer, press the ▲ / ▼ keys to highlight PC and
press the f2 (select) key. Press the ▲ / ▼ keys to highlight PC On/Off and press the
f2 (select) key. Press the ▲ / ▼ keys to highlight Off and press the f2 (accept) key.
Press the f1 (back) key.
d. To disable communication to a printer, press the ▲ / ▼ keys to highlight Printer and
press the f2 (select) key. Press the ▲ / ▼ keys to highlight Printer On/Off and press the
f2 (select) key. Press the ▲ / ▼ keys to highlight Off and press the f2 (accept) key.
Press the f1 (back) key.
6. Press the ▲ / ▼ keys to highlight Data Log and press the f2 (select) key. Press the ▲ / ▼
keys to highlight Data Log On/Off and press the f2 (select) key. Press the ▲ / ▼ keys to
highlight On to enable the data log and press the f2 (accept) key or press the ▲ / ▼ keys
to highlight Off to disable the data log and press the f2 (accept) key. Press the ▲ / ▼ keys
to highlight Ring Buffer and press the f2 (select) key. Press the ▲ / ▼ keys to highlight Off
or On and press the f2 (accept) key. If Off is selected, an error message will be displayed
when all 1000 data log points are filled and the data log must be emptied to clear the error
message. If On is selected, the oldest data log point will be overwritten with the new data
log point when all 1000 data log points are filled. Once all of the data log settings are
entered, press the f1 (back) key.
7. Once all of the exporting settings are entered, press the f1 (back) key until the meter returns
to the measurement mode.
Data Storage and Retrieval
Orion Dual Star pH/ISE Benchtop Meter User Manual
Section 7
|
61
|