Thermo Scientific Orion Dual Star User Manual page 30

Section 3 Meter Setup
|
30 Orion Dual Star pH/ISE Benchtop Meter User Manual
|
o Log Export – Press the ▲ / ▼ keys to highlight Log Export and press the f2 (accept)
key. Press the ▲ / ▼ keys to highlight Today, Last 10, Range or All as the data log
points to be exported and press the f2 (accept) key. If Today, Last 10 or All is selected,
press the f2 (yes) key to export the data. If Range is selected, use the numeric keypad
to enter the number of the first data point to be exported, press the f2 (accept) key, use
the numeric keypad to enter the number of the last data point to be exported, press the
log/print key and press the f2 (yes) key to export the data.
o Log Clear – Press the ▲ / ▼ keys to highlight Log Clear and press the f2 (accept)
key. Press the f2 (yes) key to clear the entire data log. Enter the password using the
alphanumeric keypad and press the f2 (accept) key. The default password is
111111111. Press the f1 (back) key to return to the list of data points.
o Press the f1 (back) key to return to the log view settings.
o Calibration Log – Press the ▲ / ▼ keys to highlight Calibration Log and press the
f2 (accept) key. Press the ▲ / ▼ keys to highlight Channel 1 Cal or Channel 2 Cal
and press the f2 (select) key. Press the ▲ / ▼ keys to highlight pH, ISE, RmV, ORP
or Temperature as the calibration type and press the f2 (select) key. The meter will
display a list of calibrations for the selected channel and calibration type. The list
shows the sequential number of the calibration (Cal_101), the date that the point was
saved (07/05/2008) and the time that the point was saved (12:05). To view the
calibration data, press the ▲ / ▼ keys to highlight the calibration point and press the
f2 (select) key. Press the f2 (print) key to print the calibration point, press the f3 (graph)
key to view the calibration graph or press the f1 (back) key to return to the list of
calibration points.
o Press the f1 (back) key to return to the log view settings.
Once all of the log view settings are entered, press the f1 (back) key.
•
Note: When a data point is exported to a computer or printer, the time stamp will include the
hour, minutes and seconds.
Display
Press the ▲ / ▼ keys to highlight Display and press the f2 (select) key. View and change the
Display View, Backlight and Contrast settings, if required.
Display View – Press the ▲ / ▼ keys to highlight Display View and press the f2 (select)
•
key. Press the ▲ / ▼ keys to highlight Channel 1, Channel 2 or Channel 1 & 2 and press
the f2 (accept) key.
Backlight – Press the ▲ / ▼ keys to highlight Backlight and press the f2 (select) key.
•
Press the ▲ / ▼ keys to set the backlight to Off, 1 (lowest setting), 2, 3, 4 or 5 (highest
setting) and press the f2 (accept) key.
Thermo Scientific