Power Trim/Tilt Switch - Honda BF75D Owner's Manual

CONTROLS AND FEATURES

Power Trim/Tilt Switch

(side-mount type)
POWER
TRIM/TILT
SWITCH
(panel-mount type)
POWER TRIM/TILT SWITCH
CONTROL LEVER
32
(top-mount single type)
POWER TRIM/TILT SWITCH
CONTROL
LEVER
(top-mount dual type)
POWER TRIM/TILT SWITCHES
(LEFT)
The power trim/tilt switch is located
on the control lever. It is a rocker
switch with UP and DN (down)
positions for changing the angle of
the outboard motor.
You can use the power trim/tilt switch
anytime whether the boat is
underway, stopped, or the ignition
CONTROL
switch is in the OFF position. It is
LEVER
necessary for the ignition switch to be
in the ON position for the trim meter
to indicate the outboard motor angle.
Trim the outboard motor to obtain the
best performance and stability (p.67).
(RIGHT)
Tilt the outboard motor for shallow
water operation, beaching, launching,
or mooring.
For dual mount outboard motors, tilt
them up at the same time.
CONTROL
LEVERS