Honda BF75D Owner's Manual page 65

STARTING THE ENGINE
FUEL LINE CONNECTOR
− To fuel tank
(FUEL TANK SIDE)
Connect the fuel line to the tank.
2.
Be sure the connector is securely
latched.
64
VENT KNOB
O O P P E E N N
Open the fuel cap vent knob 2 to 3
3.
turns.
(Using the fuel tank mounted on
the boat)
FUEL TUBE ASSEMBLY
(equipped type)
(motor side)
BARB
HOSE CLAMP
(stainless steel)
(FUEL TANK SIDE)
Remove the hose plug from the
1.
engine side fuel hose. Insert the
fuel line joint into the engine side
fuel hose and secure it with the
hose clamp. (The procedure is the
same as in the case of using a fuel
tank equipped type. Refer to the
previous page.)
2. Insert another fuel line joint up to
the barb of the joint in the fuel
tank side and secure it with the
hose clamp (stainless steel type).
Refer to the owner's manual for
the boat.
FUEL HOSE
(tank side)