R Type - Honda BF75D Owner's Manual

OPERATION
(R2 type)
Cruising (R type)
(R1 type)
POWER TRIM/TILT
SWITCH
POWER TRIM/TILT
SWITCH
1. Press the DN (down) of the power
trim/tilt switch and trim the motor
at the lowermost position.
90
LOWERMOST
POSITION
R3 type:
When the two outboard motors are
mounted:
1) Press the DN (down) of the power
trim/tilt switch on the control lever
side and trim the outboard motors
at the lowermost position.
(R3 type)
(single type)
(dual type)
POWER TRIM/TILT
POWER TRIM/TILT SWITCH
SWITCH
(LEFT)
With the outboard motors trimmed
2)
at the lowermost position, adjust
the trim angle of the right and left
outboard motors using the switch
on the console side separately or
using the switch on the control
lever simultaneously.
(RIGHT)