Moorage - Honda BF75D Owner's Manual

Moorage

TILT LOCK LEVER
Tilt up the outboard motor using the
tilt lock lever when mooring the boat.
Shift the control lever into the
NEUTRAL position and stop the
engine before tilting up the outboard
motor.
Before tilting up, hold the outboard
motor in the position for one minute
after stopping the engine to drain the
water inside the engine.
F F R R E E E E
L L O O C C K K
TILT LOCK LEVER
1. Raise the motor as far as it goes
using the power trim/tilt switch.
2. Move the tilt lock lever to the
LOCK position and lower the
outboard motor until the lock lever
contacts the stern bracket.
3. Press the DN (down) of the power
trim/tilt switch and fully shorten
the trim rods.
4. To tilt down, raise the outboard
motor as far as it goes using the
power trim/tilt switch, move the
tilt lock lever to the FREE position.
OPERATION
TRIM RODS
97