Other Checks - Honda BF75D Owner's Manual

PRE-OPERATION CHECKS

Other Checks

(2)
(1)
Check the following items:
(1) The fuel hose for kinking,
collapsing or a loose connection.
(2) The tiller handle for loose
installation, wobble or smooth
operation (H type).
The remote control lever for
smooth operation (R type).
(3) The switch for correct operation.
(4) The stern bracket for damage.
(5) The tool kit for missing spare parts
and tools.
(6) The anode metal for damage,
looseness or excessive corrosion.
62
(3)
(2)
(3)
(4)
(6)
The anode (sacrificed metal) helps to
protect the outboard motor from
corrosion damage; it must be exposed
directly to the water whenever the
motor is in use. Replace the anode
metal when it has been reduced to
approximately one half of its original
size.
The possibility of corrosion
damage is increased if the anode is
painted over or allowed to
deteriorate.
(5) TOOL KIT
10 × 14 mm WRENCH
SPARK PLUG WRENCH
18
8 × 12 mm WRENCH
BOX WRENCH
OIL CHECK
10 mm BOX WRENCH
SCREWDRIVER
PHILLIPS/FLAT
PLIERS
SCREWDRIVER
SCREWDRIVER
HANDLE
SPARE EMERGENCY
STOP SWITCH CLIP
Parts/materials which should be
installed on board:
(1) Owner's Manual
(2) Tool kit
(3) Spare parts: spark plugs, engine oil,
spare propeller, castle nut, washer
and cotter pin.
(4) Other parts/materials required by
laws/regulations.
EMERGENCY
STARTER ROPE
× 19 mm
FUSE PULLER
TOOL BAG