(H type)
''
'' MARK
THROTTLE
GRIP
7. H type:
''
''
Align the
(start mark) on
the throttle grip with the projected
''
''
end of the
mark on the
tiller handle.
R1 type:
Leave the fast idle lever in the
START (fully lowered) position.
(R1 type)
FAST IDLE LEVER
START
STARTING THE ENGINE
START
KNOT
Set the AC generator rotor so the
8.
cutouts are on the right and left
sides of the AC generator rotor as
shown. Hook the knot at the end of
the starter rope (accessory) against
a cutout in the AC generator rotor
and wind the starter rope one and
half turns clockwise along the
groove in the AC generator rotor.
EMERGENCY
STARTER ROPE
AC GENERATOR ROTOR
79