Common Controls; Power Trim/Tilt Switch - Honda BF200A Owner's Manual

CONTROLS AND FEATURES

Common Controls

Power Trim/Tilt Switch

(side-mount type)
POWER
TRIM/TILT
SWITCH
(panel-mount type)
POWER TRIM/TILT SWITCH
26
(top-mount type)
SINGLE TYPE
POWER TRIM/TILT SWITCH
CONTROL
LEVER
DUAL TYPE
POWER TRIM/TILT SWITCH
(LEFT)
CONTROL LEVER
The power trim/tilt switch is located
on the control lever. It is a rocker
switch with UP and DN (down)
positions for changing the angle of
the outboard motor.
You can use the power trim/tilt
switch anytime whether the boat is
underway, stopped, or the ignition
switch is in the OFF position. It is
necessary for the ignition switch to be
CONTROL
LEVER in the ON position for the trim meter
to indicate the outboard motor angle.
Trim the outboard motor to obtain the
best performance and stability (p. 50).
Tilt the outboard motor for shallow
(RIGHT)
water operation, beaching, launching,
or mooring.
For dual mount outboard motors, tilt
them up at the same time.
CONTROL
LEVERS