Using The Optional Rc-V100 Remote Controller - Canon ME20F-SHN Setup Manual

Using the Optional RC-V100 Remote Controller

You can connect the optional RC-V100 Remote Controller to control the camera. In addition to turning the
camera on and off and navigating the menu, you can control various shooting-related functions, such as
aperture, shutter speed, and custom picture settings, like knee and sharpness. For details on how to connect
and use the remote controller, refer to its instruction manual. Visit your local Canon website to download the
latest version.
NOTES
• The following controls on the remote controller will not operate the camera: ONSCREEN button,
u (review recording) button, SHUTTER SELECT button, AGC button, AUTO KNEE button, AF button and
AUTO IRIS button.
• The ZOOM dial on the remote controller can operate the camera only when a compatible EF Cinema lens
(A 33) is attached to the camera and the lens's zoom operation change-over knob is set to SERVO.
• To turn on the camera on its body side after turning it off using the remote controller, press the REBOOT
switch, or disconnect and reconnect the LAN cable.
• You can disable the operation from the remote controller (A Network Operation Guide).
Using the Optional RC-V100 Remote Controller
Remote cable
(supplied with the
RC-V100)
To the RC-V100's
REMOTE A terminal
31