Canon ME20F-SHN Setup Manual page 14

Connecting the Power Supply
IMPORTANT
• You can power the camera using a commercially available external power supply connected to the DC IN
11-17 V terminal (via a commercially available power cable, using the supplied power connector).
External power supply (commercially available)
Power supply (output): 11 to 17 V DC
Current (output): 3 A or higher
14 Power cable (commercially available)
Power cable rating: 3 A or higher (current-carrying capacity) / 30 V DC (rated)
• When using a 12 V DC battery power supply, be sure to connect resistors of at least 0.5 – 1.0 Ω/20 W in
series to the power line.
• Make sure to use an external power supply that meets the standards of the country/region where it is used.
• Make sure the external power supply is a double-insulated device and is insulated for commercial power
use.
Recommended Power Cables [Reference]
Cable (AWG)
12 V DC maximum cable length
17 V DC maximum cable length
Use UL cable (UL-1015 or equivalent) for wiring.
24
m 1
(ft.) (3.3)
m 11
(ft.) (36.1)
22 20
2 4
(6.6) (13.1)
17 27
(55.8) (88.6)
18 16
6 9
(19.7) (29.5)
43 62
(141.0) (203.4)