2
Setup
Example Configuration
The following example configuration illustrates how to connect the camera to external devices such as a
monitor (A 16) or video recorder (A 26).
LAN cable
Network HUB
Pantilter, etc.
NOTES
• When connecting the optional RC-V100 Remote Controller to the camera, make sure that the remote
controller's terminal selection switch is set to REMOTE A.
• If a network HUB is the power supply, use a network HUB that supports PoE+.
External
recorder
3G/HD-SDI input
BNC cable
(commercially
available)
RC-V100's
REMOTE A terminal
Remote cable (supplied
with the RC-V100)
External microphone
(commercially available)
HDMI cable
(commercially
DC power
External
device
RC-V100 Remote
Controller (optional)
available)
HDMI input
External monitor
supply
11