Connecting To Rs-422/485 Terminals - Canon ME20F-SHN Setup Manual

Connecting to RS-422/485 Terminals

Connecting to RS-422/485 Terminals
Connect the camera to external devices such as a pantilter (commercially available) using the RS-422/485
terminals.
28
IMPORTANT
• Do not push the RS-422/485 terminal button with too much force. Doing so may cause the button to
remain pushed-in.
NOTES
• Adaptive wiring for cables: Solid wire/Stranded wire AWG No. 26 – 20
• Cable strip should be approx. 11 mm (0.43 in.).
• The recommended maximum length of cable is 30 m (98.4 ft.).
2-wire cable 4-wire cable
Pantilter Pantilter