Operating Instructions - Aktakom ACM-2031 User Manual

or off
11.Rigge
Press the lever to open the transformer. When
the lever is released, the jaws will close again.

OPERATING INSTRUCTIONS

DC VOLTAGE MEASUREMENT
1. Insert the black and red test leads into the COM
and V: Hz
2. Set rotary switch at desired V
Connect the test lead tips in parallel with the
circuit to be measured. Be careful not to touch
any electrical conductors. The polarity of the red
lead connection will be indicated along with the
voltage value.
3. Read the measure result from the display.
AC VOLTAGE MEASUREMENT
1. Insert the black and red test leads into the
COM andV:Hz
2. Set rotary switch at desired V~ position.
Connect the test lead tips in parallel with the
circuit to be measured. Be careful not to touch
any electrical conductors.
3. Read the measure result from the display.
4.When measuring AC voltage, pushing
Hz/DUTY button, the frequency of ACV will
input terminals respectively.
input terminals respectively.
position.