Page 1
SD card real time datalogger, RS232/USB ENVIRONMENT METER Model : ATE-9538 Your purchase of this SOUND LEVEL METER w i t h C A R D DATALOGGER marks a step forward for you into field precision measurement. Although this METER is...
1. FEATURES * Environment instrument, multi-function, all in one. * Type K/J thermometer, Humidity/Temp. meter, Anemometer, Light meter, Sound level meter ( optional adapter ). * Humidity measurement show both %RH and Temp. . * Anemometer can default the display unit to m/S, FPM, Km/h, mph, knot.
2. SPECIFICATIONS 2-1 General Specifications Circuit Custom one-chip of microprocessor LSI circuit. Display LCD size : 52 mm x 38 mm LCD with green backlight ( ON/OFF ). Measurement * Type K/J thermometer Unit * Humidity/Temp. meter * Anemometer with Temp. * Light meter * Sound level meter ( optional adapter ) Datalogger...
Page 5
Temperature Automatic temp. compensation for the Compensation Anemometer function and the type K/J thermometer. Data Hold Freeze the display reading. Memory Recall Maximum & Minimum value. Sampling Time Approx. 1 second. of Display Data Output RS 232/USB PC computer interface. * Connect the optional RS232 cable UPCB-02 will get the RS232 plug.
Page 6
Optional * SD Card ( 1 G ) Accessories * SD Card ( 2 G ) * Type K thermocouple probe. TP-01, TP-02A. TP-03, TP-04 * Sound adapter, SL-417 * AC to DC 9V adapter. * USB cable, USB-01. * RS232 cable, UPCB-02. * Data Acquisition software,SW-U801-WIN.
Page 7
B. Temperature Measuring Range to 50 to 122 ℃ ℃ ℉ ℉ Resolution /0.1 ℃ ℉ Accuracy ± 0.8 /1.5 ℃ ℉ Light meter Measuring Range 0 to 20,000 LUX. Ft-cd 0 to 1,860 Ft-cd Resolution 1 LUX Ft-cd 0.1 Ft-cd Accuracy ±...
3. FRONT PANEL DESCRIPTION Fig. 1 3-1 Display 3-2 Power Button ( ESC, Backlight Button ) 3-3 Hold Button ( Function Button, Next Button ) 3-4 REC Button ( Enter Button, Unit Button ) 3-5 SET Button ( Button, Time check Button ) ▼...
4. MEASURING PROCEDURE 4-1 Function selection 1) Turn on the meter by pressing the " Power Button " ( 3-2, Fig. 1 ) momentarily. Pressing the " Power Button " ( 3-2, Fig. 1 ) continuously and > 2 seconds again will turn off the meter.
4-2 Air velocity/Temp. measurement 1) Function select to " Air velocity/Temp. " measurement. 2) Plug the " Probe Plug " ( 3-21, Fig. 1 ) into the " Probe Input Socket " ( 3-7, Fig. 1 ). Power on the meter by pressing the " Power Button " ( 3-2, Fig.
4-3 Humidity and Temperature measurement 1) Function select to " Humidity/Temp. " measurement. Plug the " Probe Plug " ( 3-21, Fig. 1 ) into the " Probe Input Socket " ( 3-7, Fig. 1 ). 2) Power on the meter by pressing the " Power Button " ( 3-2, Fig.
Change the temperature unit ( ℃ ℉ The meter Temp. display unit is defaulted to " ". ℃ If intend to let the meter's temperature unit default to " " , then please refer chapter 7-6 ( page 22 ). ℉...
Zero adjustment During the Light measurement, blank the Light Sensor ( 3-20, Fig. 1 ) completely, if the Display is not show zero value, press the " Logger Button " ( 3-6, Fig. 1 ) > 3 seconds, Display will show the zero value.
4-8 Data Record ( Max., Min. reading ) 1) The data record function records the maximum and minimum readings. Press the " REC Button " ( 3-4, Fig. 1 ) once to start the Data Record function and there will be a " REC " symbol on the display. 2) With the "...
5. DATALOGGER 5-1 Preparation before execute datalogger function a. Insert the SD card Prepare a " SD memory card " ( 1 G to 16 G, optional ), insert the SD card into the " SD card socket " ( 3-9, Fig. 1). The front panel of the SD card should face against the down case.
5-2 Auto Datalogger ( Set sampling time 1 second ) ≧ a. Start the datalogger Press the " REC Button ( 3-4, Fig. 1 ) once , the LCD will show the text " REC ", then press the " Logger Button " ( 3-6, Fig.
5-3 Manual Datalogger ( Set sampling time = 0 second ) a. Set sampling time is to 0 second Press the " REC Button ( 3-4, Fig. 1 ) once , the LCD will show the text " REC ", then press the " Logger Button " ( 3-6, Fig.
5-5 Check sampling time information During the normal measurement ( not execute the Datalogger ), If press " Sampling Button " ( 3-6, Fig. 1 ) once , the lower LCD display will present the Sampling time information in second unit. 5-6 SD Card Data structure 1) When the first time, the SD card is used into the meter, the SD card will generate a folder :...
6. Saving data from the SD card to the computer ( EXCEL software ) 1) After execute the Data Logger function, take away the SD card out from the " SD card socket " ( 3-9, Fig. 1 ). 2) Plug in the SD card into the Computer's SD card slot ( if your computer build in this installation ) or insert the SD card into the "...
EXCEL graphic screen ( for example ) 7. ADVANCED SETTING Under do not execute the Datalogger function, press the " SET Button " ( 3-5, Fig. 1 ) continuously at least two seconds will enter the " Advanced Setting " mode. then press the "...
Remark : During execute the " Advanced Setting " function, if press " Esc Button " ( 3-2, Fig. 1 ) once will exit the " Advanced Setting " function, the LCD will return to normal screen. 7-1 Set clock time ( Year/Month/Date, Hour/Minute/ Second ) When the lower display show "...
7-2 Decimal point of SD card setting The numerical data structure of SD card is default used the " . " as the decimal, for example "20.6" "1000.53" . But in certain countries ( Europe ...) is used the " , " as the decimal point, for example "...
7-4 Set beeper sound ON/OFF When the lower display show " bEEP " 1) Use the " Button " ( 3-6, Fig. 1 ) or " Button " ▲ ▼ ( 3-5, Fig. 1 ) to select the upper value to " yES " or "...
7-6 Select the Temp. unit to ℃ ℉ When the lower display show " t-CF " 1) Use the " Button " ( 3-6, Fig. 1 ) or " Button " ▲ ▼ ( 3-5, Fig. 1 ) to select the upper Display text to " C " or "...
2) If select the upper to " yES ", press the " Enter Button " ( 3-4, Fig. 1 ) once again, the Display will show text " yES Enter " to confirm again, if make sure to do the SD memory card format, then press "...
10. SYSTEM RESET If the meter happen the troubles such as : CPU system is hold ( for example, the key button can not be operated... ). Then make the system RESET will fix the problem. The system RESET procedures will be either following method : During the power on, use a pin to press the "...
Page 27
Meter (9W 'D" Connector) Center Pin......Pin 4 (3.5 mm jack plug) Ground/shield.......Pin 2 2.2 K resistor Pin 5 The 16 digits data stream will be displayed in the following format : D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Each digit indicates the following status : End Word D1 &...
RS232 FORMAT : 9600, N, 8, 1 Baud rate 9600 Parity No parity Data bit no. 8 Data bits Stop bit 1 Stop bit 12. Optional Type K Temp. probe (Type K) TP-01 * Max. short-tern operating Temperature: 300 (572 ℃...
13. PATENT The meter ( SD card structure ) already get patent or patent pending in following countries : Germany Nr. 20 2008 016 337.4 JAPAN 3151214 TAIWAN M 358970 M 359043 CHINA ZL 2008 2 0189918.5 ZL 2008 2 0189917.0 Patent pending...