Table of Contents
Advertisement
SAFETY INFORMATION
The digital clamp meter has been designed
according to IEC1010 1 and IEC1010 2 032
concerning safety requirements for electrical
measuring instruments and hand-held current
clamps
with
double
insulation
overvoltage
category 1000V CAT II 600V CAT III and
pollution 2.
This meter complies with the requirements of the
following European Community Directives:
89 / 336 / EEC (Electromagnetic Compatibility)
and 73 / 23 / EEC (Low Voltage) as amended by
93 / 68 / EEC (CE Marking).
However, electrical noise or intense electromag-
netic fields in the vicinity of the equipment may
disturb the measurement circuit.
Measuring instruments will also respond to
unwanted signals that may be present within the
measurement circuit.
Users should exercise care and take appropriate
precautions to avoid misleading.
SYMBOL EXPLANATION
Important safety information, refer to the
operating manual.
Dangerous voltage may be present.
Advertisement
Table of Contents
