Table of Contents
Advertisement
You always are careful when working with
voltages above 60V dc or 30V ac rms. Keep
fingers
behind
measuring.
To avoid damages to the instrument, do not
exceed the maximum limits of the input values
shown in the technical specification tables.
Never use the meter to measure voltages that
might exceed the maximum allowable input value
of any function.
MAINTENANCE
1. Never touch exposed wiring, connections or
any live circuit
measurements.
2. Before opening the case, always disconnect
test leads from all energized circuits.
3. Never use the meter unless the back cover is
in place and fastened completely.
4. Do not use abrasives or solvents on the meter.
To clean it using a damp cloth and mild detergent
only.
5. Qualified and trained service technicians
should only perform calibration and repair of the
meter.
the
probe
when attempting to take
barriers
while
Advertisement
Table of Contents
