Table of Contents
Advertisement
display will show the current environment
temperature.
3. Contacting the object be measured with the
thermocouple probe.
4. Read temperature value on the LCD display.
DUTY CYCLE TEST
1. Insert the black and red test leads into the
COM andV:Hz
2. Set rotary switch at desired Hz position.
Push Hz/Duty button to select % mode and
connect the test lead tips in parallel with the
circuit to be measured. Be careful not to touch
any electrical conductors.
3.Read the measure result directly from LCD
display.
SPECIFICATIONS
Accuracy:
±% of reading ±number of least significant digits
at 18
to 28 , with relative humidity up to 75%.
All specifications assume less than 1 year since
calibration. Temperature coefficient:0.1×specified
accuracy/
GENERA
Maximum voltage: 1000V DC or 700V AC RMS
Altitude: <2000m
input terminals respectively.
Advertisement
Table of Contents
