To Remove the Valve/Loop Cover
Maintenance
1
Gather the following:
•
T- 20 Torx driver
2
Remove the pneumatics front cover. See
Pneumatics Front
Remove the valve thermal enclosure. See
3
Valve Thermal
Enclosure".
4
Completely loosen the three T- 20 Torx captive screws on
the valve/loop cover
Figure 11 Valve/loop cover
Remove the valve/loop cover.
5
Reinstallation is the reverse of these steps.
Removing Covers and Components
Cover".
(Figure
11).
2
"To Remove the
"To Remove the
19