To Install The Valve Thermal Enclosure - Agilent Technologies 7697A Maintenance Manual

2
Removing Covers and Components

To Install the Valve Thermal Enclosure

C A U T I O N
12
To install the valve thermal enclosure:
1 Locate the valve thermal enclosure's transfer line cutout,
and align it with the transfer line
Figure 3 The valve thermal enclosure's transfer line cutout
Carefully lower the valve thermal enclosure over the valve
2
and loop areas with the transfer line cutout facing the
left side of the Headspace.
Be sure to not damage the transfer line and other nearby cables
when lowering the valve thermal enclosure.
(Figure 3).
Transfer line cutout
Maintenance