To Remove The Loop Cover - Agilent Technologies 7697A Maintenance Manual

2
Removing Covers and Components

To Remove the Loop Cover

18
1 Gather the following:
• T- 20 Torx driver
2 Remove the pneumatics front cover. See
Pneumatics Front
Remove the valve thermal enclosure. See
3
Valve Thermal Enclosure".
4 Completely loosen the T- 20 Torx captive screw on the
loop cover (Figure
Figure 10 Loop cover
5 Remove the loop cover.
Reinstallation is the reverse of these steps.
Cover".
10).
"To Remove the
"To Remove the
Loop cover
Maintenance