Settings - RGBlink MSP 200PRO User Manual

3.3.8 Settings

Touch the settings icon
System Touch the icon, it will show the serial number, MCU version, FPGA version and cell
Info voltage.
Touch the icon, it will pop up 3 buttons: "Update FPGA", "Update VIDEO" and
"Update MCU".
Touch "Update FPGA" to upgrade the external FLASH of FPGA. It will pop up the
progress bar twice during upgrade, the first time is erasing, and the second time is
programming. Restart the device when the progress bar up to 100% for the
second time.
Note: Don't touch anywhere on the screen during upgrade.
Upgrade Touch "Update VIDEO" to upgrade the HDMI+USB module, the operation is same
with "Update FPGA".
Touch "Update MCU", MCU will be started. Then it will pop up the "UPDATE"
dialog box if the SD card initialization is successful. Touch "UPDATE" again to
upgrade the MCU, the device will restart when the upgrade is over. If the SD card
initialization is unsuccessful, it will prompt "SD CARD ERROR", user need to power
off and restart the device, then touch "UPDATE".
Note: Don't touch anywhere on the screen during upgrade.
MSP 200PRO
, the LCD touch display will show the menus as follows:
User Manual
Chapter 3 : Using Your Product
19